Difference between revisions of "Counts Rate (44 MeV LINAC)"
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
=Number of electrons/sec on radiator= | =Number of electrons/sec on radiator= | ||
+ | |||
<math> 50ps \times 50A \times 300Hz \times \frac{1\cdot e^-}{1.6\cdot 10^{-19}C} = 0.47 \cdot 10^{13} \frac{e^-}{sec}</math><br><br> | <math> 50ps \times 50A \times 300Hz \times \frac{1\cdot e^-}{1.6\cdot 10^{-19}C} = 0.47 \cdot 10^{13} \frac{e^-}{sec}</math><br><br> | ||
+ | |||
=Number of photons/sec from radiator= | =Number of photons/sec from radiator= | ||
==bremsstrahlung== | ==bremsstrahlung== | ||
+ | |||
plot from Dale | plot from Dale | ||
in (10,20) MeV region we have about | in (10,20) MeV region we have about | ||
− | 0.1 photons/electrons/MeV/r.l | + | '''0.1 photons/electrons/MeV/r.l''' |
==radiation length== | ==radiation length== | ||
+ | |||
Titanium r.l. is 3.59 cm | Titanium r.l. is 3.59 cm | ||
take radiator thickness is <math>12.5 \mu m</math> | take radiator thickness is <math>12.5 \mu m</math> | ||
− | <math> | + | <math>12.5\mu m/3.59 cm = 3.48 \cdot 10^{-4} \ r.l.</math><br> |
==steps together...== | ==steps together...== |
Revision as of 22:32, 17 May 2010
LINAC parameters used in calculations
1) pulse width 50 ns
2) pulse current 50 A
3) repetition rate 300 Hz
4) energy 44 MeV
Number of electrons/sec on radiator
Number of photons/sec from radiator
bremsstrahlung
plot from Dale
in (10,20) MeV region we have about
0.1 photons/electrons/MeV/r.l
radiation length
Titanium r.l. is 3.59 cm
take radiator thickness is
steps together...
Collimation factor
assume we collimate 4-6 % of total # of photons (Alex, GEANT calculation)
then, incident flux on target is
Number of neutrons/sec (yields)
cross section
plot from Berman
From plot above the average cross section for
in (10,20) MeV region is:130 mb
target thickness,
Assume the target thickness is 1 cm:
neutrons per fission
2.4 neutrons/fission
steps together...
Worst Case Isotropic Neutrons
Let's say we have:
radius detector = 1 cm
1 meter away
fractional solid angle =
<= geometrical acceptancefinally we have
Therefore, this experiment is do able.