|
|
| Line 104: |
Line 104: |
| | ==collimator and pipe geometry== | | ==collimator and pipe geometry== |
| | | | |
| − | [[File:vacuum_pipe_collimator2.png]]<br> | + | [[File:vacuum_pipe_collimator_0.168.png]]<br> |
| | | | |
| | | | |
| | [http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back] | | [http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back] |
Revision as of 18:41, 25 May 2010
Go Back
Some measurements of 90 experimental degree exit port
Critical angle and displacement calculations
[math]\Theta = \frac{m_ec^2}{E_{beam}} = \frac{0.511\ MeV}{44\ MeV} = 0.67\ ^o[/math]
Kicker angle and displacement calculations
accelerator's side wall
[math]\Delta = 286\ cm\ *\ \tan(0.67^o) = 3.34\ cm[/math]
[math]x^2+x^2 = 3.34^2\ cm \ \ \Rightarrow\ \ x = 2.36\ cm[/math]
[math]\Delta = 2.36\ cm \ \ \Rightarrow\ \ \tan^{-1}\left(\frac{2.36}{286}\right) = 0.47\ ^o[/math]
detector's side wall
[math]\Delta = (286\ cm + 183\ cm)\ *\ \tan(0.67^o) = 5.48\ cm[/math]
[math]\Delta = (286\ cm + 183\ cm)\ *\ \tan(0.47^o) = 3.85\ cm[/math]
Off-axis collimation geometry
Vacuum pipe location ([math] \Theta_c/2[/math])
collimator location
1) center position:
[math]286\ cm \cdot \tan (0.47) = 2.35\ cm[/math] (wall 1)
[math](286 + 183)\ cm \cdot \tan (0.47) = 3.85\ cm[/math] (wall 2)
2) collimator diameter:
[math]\Theta_c/2 = 0.67^o/2 = 0.335^o[/math]
[math]286\ cm \cdot \tan (0.335) = 1.67\ cm[/math] (wall 1)
[math](286 + 183)\ cm \cdot \tan (0.335) = 2.74\ cm[/math] (wall 2)
collimator critical angle
[math] AB = AC - BD/2 = (2.35 - 1.67/2)\ cm = 1.52\ cm [/math]
[math] A_1D_1 = A_1C_1 + B_1D_1/2 = (3.85 + 2.74/2)\ cm = 5.22\ cm [/math]
[math] ED_1 = A_1D_1 - A_1E = (5.22 - 1.52)\ cm = 3.70\ cm [/math]
from triangle [math]BED_1[/math]:
[math] \tan (\alpha) = \frac{3.70\ cm}{183\ cm} \Rightarrow \alpha = 1.16^o[/math]
minimal distance from the wall
from triangle FAB:
[math] FA = \frac{AB}{\tan (1.16^o)} = \frac{1.52\ cm}{\tan (1.16^o)} = 75\ cm [/math]
collimator and pipe geometry
Vacuum pipe location ([math] \Theta_c/4[/math])
collimator location
1) center position:
[math]286\ cm \cdot \tan (0.47) = 2.35\ cm[/math] (wall 1)
[math](286 + 183)\ cm \cdot \tan (0.47) = 3.85\ cm[/math] (wall 2)
2) collimator diameter:
[math]\Theta_c/4 = 0.67^o/4 = 0.168^o[/math]
[math]286\ cm \cdot \tan (0.168) = 0.84\ cm[/math] (wall 1)
[math](286 + 183)\ cm \cdot \tan (0.168) = 1.38\ cm[/math] (wall 2)
collimator critical angle
[math] AB = AC - BD/2 = (2.35 - 0.84/2)\ cm = 1.93\ cm [/math]
[math] A_1D_1 = A_1C_1 + B_1D_1/2 = (3.85 + 1.38/2)\ cm = 4.54\ cm [/math]
[math] ED_1 = A_1D_1 - AB = (4.54 - 1.93)\ cm = 2.61\ cm [/math]
from triangle [math]BED_1[/math]:
[math] \tan (\alpha) = \frac{2.61\ cm}{183\ cm} \Rightarrow \alpha = 0.82^o[/math]
minimal distance from the wall
from triangle FAB:
[math] FA = \frac{AB}{\tan (0.82^o)} = \frac{1.93\ cm}{\tan (0.82^o)} = 135\ cm [/math]
collimator and pipe geometry
Go Back
