Difference between revisions of "HRRL 7-31-09"
Jump to navigation
Jump to search
| Line 87: | Line 87: | ||
|Card 2 Threshold | |Card 2 Threshold | ||
|- | |- | ||
| − | | | + | | 1300|| 151 || 116 |
|- | |- | ||
| − | | | + | | 1301|| 153 || 118 |
|- | |- | ||
| − | | | + | | 1302|| 155 || 120 |
|- | |- | ||
| − | | | + | | 1303|| 157 || 122 |
|} | |} | ||
Revision as of 22:26, 31 July 2009
Default HRRL running Conditions
| Pulse Width | Rep Rate | Energy | |
| 8 mA | 100 ns | 1 Hz | 3 MeV |
cable names
| CH ID | Description |
| 2223A1 | Front Scintillator |
| 2223A2 | Rear Scintilaltor |
| 2223A3 | ADC Gate From counting house to Experimental Cell |
| 2223A4 | TDC start pulse from counting house to experimental cell (PMT front + beam Gate) |
| 2223A5 | Coincidenc between front + rear Scint + Gun pulser to scaler channel 8 |
| 2223A6 | Metalica sense wire 4 |
| 2223A7 | Delayed rear PMT pulse to ADC |
| 2223A8 | Plastica sense wire 4 |
| 2223A9 | Plastica to scaler channel 4 |
| 2223A10 | Front scintillator to ADC |
| 2223A11 | Metalica scaler channel 1 |
| 2223A12 | DAQ trigger |
DAQ Ntuple names
| Ntuple Variable | Description |
| ADC5 | Front Scintilator |
| ADC1 | Metalica sense wire 4 |
| ADC16 | Rear Scintilator |
| ADC13 | Plastica sense wire 4 |
| TDC1 | Metalica sense wire 4 |
ADC + Scaler + TDC + V1495
| Run Number | Distance to Metallica's Feedthrough tip (cm) | Metalica scaler counts scaler ch 4 | Plastika Scaler Counts scaler ch 1 | Rear PMT + Front PMT + Gun Pulse Counts Scaler Ch 8 | HV S:F:G | Discriminator (mV) | Metalica counts/PMT+Gun pulse |
| 1263 | 19 | 0 | 1400:-700:980 | 50 |
VFAT runs
| Run Number | Card 1 Threshold | Card 2 Threshold |
| 1300 | 151 | 116 |
| 1301 | 153 | 118 |
| 1302 | 155 | 120 |
| 1303 | 157 | 122 |