Difference between revisions of "File:GEM QWeak HV Board TargetView.png"

From New IAC Wiki
Jump to navigation Jump to search
(Moved GEM HV over by about an inch Created a second pad for 1 MOhm resistor that goes to ground on far right of the board Moved 550 kOhm resistor's pad placement above 10 MOhm resistor to put them in parallel)
 
(uploaded a new version of "Image:GEM QWeak HV Board TargetView.png": Moved a few elements around (increased distance between pads, aligned pads better, etc.). Grounded all the drill holes.)

Revision as of 17:34, 15 May 2009

Moved GEM HV over by about an inch Created a second pad for 1 MOhm resistor that goes to ground on far right of the board Moved 550 kOhm resistor's pad placement above 10 MOhm resistor to put them in parallel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:59, 29 December 2010Thumbnail for version as of 23:59, 29 December 20101,041 × 659 (25 KB)Oborn (talk | contribs)Importing image file

The following page uses this file: