CAPSDAQ

The DAQ configuration at LaTech

ROC configuration

[VxWorks Boot]: c

'.' = clear field;  '-' = go to previous field;  ^D = quit

boot device          : fei0 
processor number     : 0 
host name            : capsdaq 
file name            : /daq/vxworks/kern/5.4/vx5110-256MB 
inet on ethernet (e) : 138.47.37.31:fffffc00 
inet on backplane (b): 
host inet (h)        : 138.47.37.25 
gateway inet (g)     : 
user (u)             : daq 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x20 
target name (tn)     : roc2 
startup script (s)   : /daq/vxworks/kern/bootscripts/roc2.boot 
other (o)            :

Steps to installing Their MVME5100 into ISUs CODA system

It looks like they were using VxWorks 5.4 and I use version 5.5

Now I need to make a choice to either

1. install VxWorks version 5.4 and run their kernel or
2. upgrade their kernel to using VxWorks version 5.5

Install their ROC OS

ROC config changes

[VxWorks Boot]: c

'.' = clear field;  '-' = go to previous field;  ^D = quit

boot device          : fei0 
processor number     : 0 
host name            : daq 
file name            : /usr/local/coda/LaTechCoda/kern/5.4/vx5110-256MB 
inet on ethernet (e) : 138.47.37.31:fffffc00 
inet on backplane (b): 
host inet (h)        : 134.50.3.210
gateway inet (g)     : 
user (u)             : daq 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x20 
target name (tn)     : roc2 
startup script (s)   : /daq/vxworks/kern/bootscripts/roc2.boot 
other (o)            :