Difference between revisions of "Forest IonizationChambers"

From New IAC Wiki
Jump to navigation Jump to search
Line 15: Line 15:
 
=Ionization=
 
=Ionization=
  
Once the voltage is increased beyond the above threshold, the ions/ electrons make it to the cathode/anode and produce an electronic pulse on the wire (cathode).
+
Once the voltage is increased beyond the above threshold, the ions/ electrons make it to the cathode/anode and produce an electronic pulse on the wire (cathode).  The voltage is high enough to attract all of the electron-ion pairs.  The pulse height (signal) out of the chamber is independent of the voltage at this point.
  
 
quick definitions
 
quick definitions
Line 27: Line 27:
 
The flow of electrons is from the cathode to the anode.   
 
The flow of electrons is from the cathode to the anode.   
  
 +
=Proportional=
 +
 +
At a certain voltage though the electron-ions pairs  gain enough kinetic energy that they can start to ionization the chamber gas as well.  Now the pulse height (signal) out of the chamber depends on the Voltage on the wire.
 +
 +
 +
 +
= Geiger Muller=
  
 
[[Image:GM_Plateau.jpg]]
 
[[Image:GM_Plateau.jpg]]

Revision as of 18:19, 9 June 2008

An ionization chamber is essentially a gas filled volume which has one or more wires suspended inside with a voltage bias used to collect any ions or liberated electrons within the volume.

There are 4 basic operating regions which are determined by the amount of the voltage across the wire(s).

  1. recombination
  2. ionization
  3. proportional (plataue)
  4. Geiger-Muller


Recombination

Until the voltage reaches a high enough value (threshold), the liberated electrons produces will recombine with the gas before reaching the wire.

Ionization

Once the voltage is increased beyond the above threshold, the ions/ electrons make it to the cathode/anode and produce an electronic pulse on the wire (cathode). The voltage is high enough to attract all of the electron-ion pairs. The pulse height (signal) out of the chamber is independent of the voltage at this point.

quick definitions

Anode
Current IN, positively charged electrode
Cathode
Current OUT, negatively charged electrode

The flow of electrons is from the cathode to the anode.

Proportional

At a certain voltage though the electron-ions pairs gain enough kinetic energy that they can start to ionization the chamber gas as well. Now the pulse height (signal) out of the chamber depends on the Voltage on the wire.


Geiger Muller

GM Plateau.jpg


Go Back