Difference between revisions of "Mylar Linear Small Deflection"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | = | + | =Mylar Linear Small Deflection= |
Shapes Considered for calculating the Percentage error in results | Shapes Considered for calculating the Percentage error in results | ||
| Line 5: | Line 5: | ||
* Circle with a radius of 50mm and thickness of 0.0254mm | * Circle with a radius of 50mm and thickness of 0.0254mm | ||
* Actual Size of the sheet with 0.254mm Thick | * Actual Size of the sheet with 0.254mm Thick | ||
| + | |||
| + | == Square Section == | ||
| + | === Ansys Analysis=== | ||
| + | [[Image:Mylar_Square.jpg]] | ||
| + | |||
| + | Total Deformation observed in ANSYS is 1016.6 mm and by hand calculation it is observed to be 1108.6mm | ||
| + | |||
| + | ===Hand Calculations== | ||
| + | |||
| + | [[Image:Mylar_rect_table.jpg]] | ||
| + | |||
| + | == Circular Section == | ||
| + | === Ansys Analysis=== | ||
| + | |||
| + | [[Image:mylar_circular.jpg]] | ||
| + | |||
| + | The Maximum total deformation is observed to be 789.93mm | ||
| + | |||
| + | ===Hand Calculations== | ||
| + | |||
| + | |||
| + | [[Image:Mylar_actual.jpg]] | ||
Revision as of 11:50, 9 June 2008
Mylar Linear Small Deflection
Shapes Considered for calculating the Percentage error in results
- Square with rectangular approach of 100mm x 100mm with a thickness of 0.0254mm
- Circle with a radius of 50mm and thickness of 0.0254mm
- Actual Size of the sheet with 0.254mm Thick
Square Section
Ansys Analysis
Total Deformation observed in ANSYS is 1016.6 mm and by hand calculation it is observed to be 1108.6mm
=Hand Calculations
Circular Section
Ansys Analysis
The Maximum total deformation is observed to be 789.93mm
=Hand Calculations
