Phi angle in CM frame for different runs

EC_total, [math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math], missing mass, [math]\displaystyle{ \theta_{e} }[/math] vs [math]\displaystyle{ \phi_{e} }[/math]

Electron Momentum vs EC_total

Missing Mass

[math]\displaystyle{ \theta_{e}^{LAB} }[/math] vs [math]\displaystyle{ \phi_{e}^{LAB} }[/math]

[1]

Phi lab [math]\displaystyle{ \varphi^{LAB} }[/math]

The angle is (0, 360).

electron sector	[math]\displaystyle{ \varphi_{e}^{LAB} }[/math]	[math]\displaystyle{ \varphi_{pion}^{LAB} }[/math]	[math]\displaystyle{ \varphi_{e}^{LAB} - \varphi_{pion}^{LAB} }[/math] after correction
1
2
3
4
5
6

Phi CM [math]\displaystyle{ \varphi^{CM} }[/math]

The phi angle after rotation and transformation to the CM frame

electron sector	[math]\displaystyle{ \varphi_{e}^{CM} }[/math]	[math]\displaystyle{ \varphi_{pion}^{CM} }[/math]
1
2
3
4
5
6

Correlation plots with[math]\displaystyle{ cos\theta_{pion}^{CM} , W }[/math] , and [math]\displaystyle{ Q^2 }[/math]

The angle is (0, 360).

[math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ W }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ Q^2 }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]

Same table as above but with the cut 1.0 < W < 1.5

[math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ W }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ Q^2 }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]

Same table as above but with the cuts 1.0 < W < 1.25 GeV , 20 MeV bins in W and 15 degree bins in [math]\displaystyle{ \phi }[/math]

[math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ W }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ Q^2 }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]

Same table as above but with the cuts 1.0 < W < 1.5 GeV and -0.2 < [math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] < 0

[math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ W }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ Q^2 }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]

Insert the same table as above but with the cuts 1.15 < W < 1.25 GeV and -0.1 < [math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] < 0, 20 MeV bins in W and 15 degree bins in [math]\displaystyle{ \phi }[/math]

[math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ W }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ Q^2 }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]

Insert the same table as above but with the cuts  W < 1.25 GeV and -0.1 < [math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] < 0, 20 MeV bins in W and 15 degree bins in [math]\displaystyle{ \phi }[/math]

[math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ W }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]	[math]\displaystyle{ Q^2 }[/math] vs [math]\displaystyle{ \phi_{diff}^{CM} }[/math]

[2]

Phi_angle_in_CM_Frame for different [math]\displaystyle{ cos\theta_{pion}^{CM} }[/math] cuts

[math]\displaystyle{ 0.8<cos\theta_{pion}^{CM}<1 }[/math]

[Back to Analysis]