Difference between revisions of "MiniPrototype CAEN V792 Calibration"
Jump to navigation
Jump to search
Line 15: | Line 15: | ||
− | [[Image: | + | [[Image:ADC_V792_Calib_7mV_Output_12-11-07_Histo.jpg | 200 px]] |
+ | [[Image:ADC_V792_Calib_7mV_Ped_12-11-07_Histo.jpg | 200 px]] | ||
+ | [[Image:ADC_V792_Calib_7mV_S_12-11-07_Histo.jpg | 200 px]] | ||
== 20 mV signal == | == 20 mV signal == |
Revision as of 17:21, 11 December 2007
I injected a signal into the Drift chamber preamps and read it out using the CAEN V792 ADC.
12/11/07
7 mV Signal
Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about 7 mv as shown below. There is a 2 mv peak to peak noise level which has structure.
The data was then collected using coda and recorded as run #189. A histogram of channel #1 is shown below.
20 mV signal
Reducing the attenuation, a 20 mV signal was sent into the ADC.
The data was then collected using coda and recorded as run #190. A histogram of channel #1 is shown below.