PbF2 CrystalNumber16: Difference between revisions
Jump to navigation
Jump to search
| Line 62: | Line 62: | ||
;Accelerator Settings | |||
{| border="1" | |||
| beam energy || 20 MeV | |||
|- | |||
| Rep Rate: || 30 Hz | |||
|- | |||
| I_peak: || 60 mA/pulse | |||
|- | |||
| pulse width:|| 0.1 <math>\mu</math>s (100 ns) | |||
|- | |||
|beam start: || 08:38 | |||
|- | |||
|beam stop: || | |||
|} | |||
Revision as of 16:01, 5 December 2007
Below are the resulting transparency measurements for PbF2 block # 16
12/3/07
- Accelerator Settings
| beam energy | 20 MeV |
| Rep Rate: | 30 Hz |
| I_peak: | 60 mA/pulse |
| pulse width: | 0.1 [math]\displaystyle{ \mu }[/math]s (100 ns) |
| beam start: | 15:39 |
| beam stop: | 16:39 |
- Pick-up Coil Pulse Recording (PbF2 crystal at z=30cm away)
O-scope pulses were recorded on the pick-up coil with dimensions in inches and the intensity measured in Volt [math]\displaystyle{ \times }[/math] ns
@16:00
@16:05
@16:10
@16:15
@16:20
@16:25
@16:30
@16:39
- Dose rate measurements (@1643 hours)
| [math]\displaystyle{ \gamma }[/math]-radiation | 3.5 mR/hr |
| [math]\displaystyle{ \beta }[/math]-radiation: | 12 mR/hr |
- Dose rate measurements (@1532 hours)
| [math]\displaystyle{ \gamma }[/math]-radiation | 3 mR/hr |
| [math]\displaystyle{ \beta }[/math]-radiation: | 7 mR/hr |
12/4/07
12/5/07
- Accelerator Settings
| beam energy | 20 MeV |
| Rep Rate: | 30 Hz |
| I_peak: | 60 mA/pulse |
| pulse width: | 0.1 [math]\displaystyle{ \mu }[/math]s (100 ns) |
| beam start: | 08:38 |
| beam stop: |