Host Computer Configuration

MVME 6100
ROC1 ethernet address: 0001AF1998B5
ROC1 ethernet address: 0001AF1998B6
MPC7457 RISC G4 processor (PPC family)

Install tftp onto the Linux host computer

For CentOS I used yumm

yum install tftp

yum install tftp-server

then I looked in the file

/etc/xinitd.d/tftp

1. default: off
2. description: The tftp server serves files using the trivial file transfer \
3. protocol. The tftp protocol is often used to boot diskless \
4. workstations, download configuration files to network-aware printers, \
5. and to start the installation process for some operating systems.

service tftp {

       socket_type             = dgram
       protocol                = udp
       wait                    = yes
       user                    = root
       server                  = /usr/sbin/in.tftpd
       server_args             = -s /tftpboot
       disable                 = yes
       per_source              = 11
       cps                     = 100 2
       flags                   = IPv4

}

to see how tftp was configured by default. The file tell me that the tftp files should be located in the subdirectory

/tftpboot

Download files from JLAB

I downloaded the boot file and VXworks kernel from JLAB

/site/coda/kern/5.5/boot/boot6100_122.bin  
/site/coda/kern/5.5/vx6100_v4.1 

Debug Connector Pinouts

Information below is Table 5-11 pg 92 of this reference

ROC Pin#	DB9 Pin #	DB9 shell	Signal
1	1	Blue	DCD (Carrier Detect)
2	7	Orange	RTS (Request to Send)
3	5	Black	GNDC
4	3	Red	TX (Transmit)
5	2	Green	RX (Recieve)
6	5	Yellow	GNDC
7	8	Brown	CTS (Clear to Send)
8	4	White	DTR (Data Terminal Ready)

Basic commands

setting the time

The command below will print the help screen for the time set command

he set

for example

MVME6100> set -t082604163100

MVME6100> time

THU AUG 26 16:31:02.00 2004

show the flash memory

MVME6100> flashShow

Load in the VxWorks boot kernel

MVME6100> tftpGet -cCLIENT_IP_ADDRESS -sSERVER_IP_ADDRESS -fFILENAME

CLIENT_IP_ADDESS is the address to send the file to SERVER_IP_ADDRESS is the address of the computer hosting the file

Flash the RAM with the program

>MVME6100>flashProgram -d/dev/flash0 -o03f00100 -nfff00

After flashing you flip dipswitch #2 on S4 fo off and powercycle