Difference between revisions of "Host Computer Configuration"

From New IAC Wiki
Jump to navigation Jump to search
Line 7: Line 7:
 
[http://www.slac.stanford.edu/grp/lcls/controls/global/standards/hardware/v6100a_ih.pdf Information below is Table 5-11 pg 92 of this reference]
 
[http://www.slac.stanford.edu/grp/lcls/controls/global/standards/hardware/v6100a_ih.pdf Information below is Table 5-11 pg 92 of this reference]
 
{| border="1"
 
{| border="1"
 
+
ROC Pin# || DB9 Pin # || Signal   
|  Pin #   ||   Signal   
 
 
|-
 
|-
|  1   ||   DCD  
+
|  1       || 1        || DCD (Carrier Detect)
 
|-
 
|-
|  2 || RTS
+
|  2       || 7        || RTS (Request to Send)
 
|-
 
|-
|  3   ||   GNDC  
+
|  3       || 5        || GNDC  
 
|-
 
|-
|  4 || TX (Transmit)
+
|  4       || 3        || TX (Transmit)
 
|-
 
|-
|  5   ||   RX (Recieve)     
+
|  5       || 2        || RX (Recieve)     
 
|-
 
|-
|  6 || GNDC
+
|  6       || 5        || GNDC
 
|-
 
|-
|  7   ||   CTS (clear to Send)     
+
|  7       || 8        || CTS (Clear to Send)     
 
|-
 
|-
|  8 || DTR  
+
|  8       || 4        || DTR (Data Terminal Ready)
 
|}
 
|}

Revision as of 00:33, 14 August 2007

MVME 6100
ROC1 ethernet address: 0001AF1998B5
ROC1 ethernet address: 0001AF1998B6
MPC7457 RISC G4 processor (PPC family)

Debug Connector Pinouts

Information below is Table 5-11 pg 92 of this reference

ROC Pin# DB9 Pin # Signal
1 1 DCD (Carrier Detect)
2 7 RTS (Request to Send)
3 5 GNDC
4 3 TX (Transmit)
5 2 RX (Recieve)
6 5 GNDC
7 8 CTS (Clear to Send)
8 4 DTR (Data Terminal Ready)