LB SageBrushWork PostDefense: Difference between revisions
Jump to navigation
Jump to search
Created page with "=Time Cuts= The first step in the PAA process is to identify the time cuts used for the split run. This must be done for all samples (50%,10%,0.1%, and 0.04%) Let's do the 50%..." |
|||
| Line 3: | Line 3: | ||
==50% Sage/Se Mixture Time Cuts== | ==50% Sage/Se Mixture Time Cuts== | ||
The 50% Se/Sage mixture was measure on Detector B (unshielded, so watch the SNR) on 5/24/17 for a total of 2130.540 seconds. The outer pure witness Se was measure first, and sub-run was roughly 300 seconds for the samples of interest, and 60 seconds for the Co-60 flag. The root command used to draw the timing information was | |||
TTree* tree = MPA; | |||
MPA->Draw("evt.Chan:evt.Sec>>hist2","evt.ADCid = 1"); | |||
which produced the histogram below | |||
Revision as of 17:30, 27 August 2018
Time Cuts
The first step in the PAA process is to identify the time cuts used for the split run. This must be done for all samples (50%,10%,0.1%, and 0.04%) Let's do the 50% sample first
50% Sage/Se Mixture Time Cuts
The 50% Se/Sage mixture was measure on Detector B (unshielded, so watch the SNR) on 5/24/17 for a total of 2130.540 seconds. The outer pure witness Se was measure first, and sub-run was roughly 300 seconds for the samples of interest, and 60 seconds for the Co-60 flag. The root command used to draw the timing information was
TTree* tree = MPA; MPA->Draw("evt.Chan:evt.Sec>>hist2","evt.ADCid = 1");
which produced the histogram below