LabSkills TF: Difference between revisions

Latest revision as of 19:59, 8 January 2011

using a voltmeter
1. Measure the voltage of a D-cell battery
2. Open the voltmeter an replace its fuse
using an external power supply
1. setting Current and voltage limits
using a pules generator
1. setup a frequency and shape
how to use a scope
1. what is a trigger and a trigger level
2. setting time and voltage scales
3. observe the output of the pulse generator on a scope, play with frequency and amplitude
using a Breadboard
1. general principle of use
2. Bread board layout, which holes are connected together
3. suggestions on use
how to solder
1. what is a cold solder joint

@@ Line 1: / Line 1: @@
 #using a voltmeter
-##replacing fuse in voltmeter
+##Measure the voltage of a D-cell battery
-#how to use a scope
+##Open the voltmeter an replace its fuse
 #using an external power supply
+##setting Current and voltage limits
 #using a pules generator
+##setup a frequency and shape
+#how to use a scope
+##what is a trigger and a trigger level
+## setting time and voltage scales
+##observe the output of the pulse generator on a scope, play with frequency and amplitude
 #using a Breadboard
+## general principle of use
+##Bread board layout, which holes are connected together
+## suggestions on use
 #how to solder
 ##what is a cold solder joint