Difference between revisions of "LabSkills TF"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | # | + | #using a voltmeter |
| − | # | + | ##Measure the voltage of a D-cell battery |
| + | ##Open the voltmeter an replace its fuse | ||
| + | #using an external power supply | ||
| + | ##setting Current and voltage limits | ||
| + | #using a pules generator | ||
| + | ##setup a frequency and shape | ||
#how to use a scope | #how to use a scope | ||
| + | ##what is a trigger and a trigger level | ||
| + | ## setting time and voltage scales | ||
| + | ##observe the output of the pulse generator on a scope, play with frequency and amplitude | ||
#using a Breadboard | #using a Breadboard | ||
| + | ## general principle of use | ||
| + | ##Bread board layout, which holes are connected together | ||
| + | ## suggestions on use | ||
| + | #how to solder | ||
| + | ##what is a cold solder joint | ||
Latest revision as of 19:59, 8 January 2011
- using a voltmeter
- Measure the voltage of a D-cell battery
- Open the voltmeter an replace its fuse
- using an external power supply
- setting Current and voltage limits
- using a pules generator
- setup a frequency and shape
- how to use a scope
- what is a trigger and a trigger level
- setting time and voltage scales
- observe the output of the pulse generator on a scope, play with frequency and amplitude
- using a Breadboard
- general principle of use
- Bread board layout, which holes are connected together
- suggestions on use
- how to solder
- what is a cold solder joint