Optim2g4beam.pl

Version 1

#!/usr/bin/env perl

#use lib "/home/golge/g4beamline/";
#use TOOLS;
#use serkan_tools;

$file_IN  = $ARGV[0];
my $file_OUT = "z_positions.in";
$deg2rad=3.141592/180.0;

open(IN,  "< $file_IN");
open(OUT,  "> $file_OUT");

while(<IN>)
{
 chomp;
 next if (/^\#/);
 @line = split;

        push @El_Num, $line[0];
        push @Name,   $line[1];
        push @S,   $line[2];
        push @Length,   $line[3];
        push @B,   $line[4];
        push @G,   $line[5];
        push @BA,   $line[9];




$_ = $line[1];


if (/^q/)
{
 if($line[3] == 13)
  {
  printf OUT ("place QType13 gradient=%f z=%.2f rename=%s\n",$line[5]*10.,($line[2]-$line[3]/2.)*10.0, $line[1]);
  }
  elsif($line[3] == 15)
  {
  printf OUT ("place QType15 gradient=%f z=%.2f rename=%s\n",$line[5]*10.,($line[2]-$line[3]/2.)*10.0, $line[1]);
  }
  elsif($line[3] == 8)
  {
  printf OUT ("place QType8 gradient=%f z=%.2f rename=%s\n",$line[5]*10.,($line[2]-$line[3]/2.)*10.0, $line[1]);
  }
  elsif($line[3] == 10)
  {
  printf OUT ("place QType10 gradient=%f z=%.2f rename=%s\n",$line[5]*10.,($line[2]-$line[3]/2.)*10.0, $line[1]);
  }
  elsif($line[3] == 20)
  {
  printf OUT ("place QType20 gradient=%f z=%.2f rename=%s\n",$line[5]*10.,($line[2]-$line[3]/2.)*10.0, $line[1]);
  }
  elsif($line[3] == 30)
  {
  printf OUT ("place QType30 gradient=%f z=%.2f rename=%s\n",$line[5]*10.,($line[2]-$line[3]/2.)*10.0, $line[1]);
  }
}

#elsif (/^o/)
#{
#  printf OUT ("place pipe_1 length=%.3f z=%.3f rename=%s\n", $line[3]*10.0, ($line[2]- ($line[3]/2.0))*10.0 , $line[1] );
#}
elsif (/^b/)
{

        if($line[3] == 15)
        {
printf OUT ("tune %s z0=%.2f z1=%.2f initial=%.8f step=0.00001 expr=atan(Px1/Pz1) tolerance=0.0000001\n",$line[1],($line[2]-$line[3]-10.0)*10.0, ($line[2]+$l
ine[3]/3.)*10),$line[4]/10.0;
        printf OUT ("place SECT_BEND1 By=%s z=%.3f rename=%s\n",$line[1],($line[2]-$line[3])*10.0, $line[1]);
        $rho=(10*$line[3])/($deg2rad*abs($line[9])); #Convert the bend radi cm-to-mm#
        printf OUT ("cornerarc C1 z=%.3f centerRadius=%.6f angle=%.6f\n", ($line[2]-$line[3])*10.0, $rho, -$line[9] );
        }
        elsif($line[3] == 30)
        {
printf OUT ("tune %s z0=%.2f z1=%.2f initial=%.8f step=0.00001 expr=atan(Px1/Pz1) tolerance=0.0000001\n",$line[1],($line[2]-$line[3]-10.0)*10.0, ($line[2]+$l
ine[3]/3.)*10),$line[4]/10.0;
          printf OUT ("place SECT_BEND2 By=%s z=%.3f rename=%s\n",$line[1],$line[4]/10., ($line[2]-$line[3])*10.0, $line[1]);
        $rho=(10*$line[3])/($deg2rad*abs($line[9]));
          printf OUT ("cornerarc C1 z=%.3f centerRadius=%.6f angle=%.6f\n", ($line[2]-$line[3])*10.0, $rho, -$line[9] );
        }

}

elsif (/^B/)
{
        if($line[4] > 0.0 )
        {
  #printf OUT ("tune %s z0=%.2f z1=%.2f initial=%.8f step=0.00001 expr=atan(Px1/Pz1) tolerance=0.0000001\n",$line[1],($line[2]-$line[3]-10.0)*10.0, ($line[2]
+$line[3]/3.)*10),$line[4]/10.0;
  #       printf OUT ("place G_DIPOLE By=%s x=G_X_offset z=(G_Z_offset)+%.3f rotation=Y%.3f rename=%s\n",$line[1],($line[2]-$line[3])*10.0, -$line[9]/2,$line
ine[1]);
        $rho=(10*$line[3])/($deg2rad*abs($line[9])); #Convert the bend radi cm-to-mm#
        printf OUT ("cornerarc C1 z=%.3f centerRadius=%.6f angle=corrected_bend_ang1\n", ($line[2]-$line[3])*10.0, $rho);
        }
        if($line[4] < 0.0 )
        {
#printf OUT ("tune %s z0=%.2f z1=%.2f initial=%.8f step=0.00001 expr=atan(Px1/Pz1) tolerance=0.0000001\n",$line[1],($line[2]-$line[3]-10.0)*10.0, ($line[2]+$
line[3]/3.)*10),$line[4]/10.0;
#printf OUT ("place G_DIPOLE By=%s x=-G_X_offset z=(G_Z_offset)+%.3f rotation=Y%.3f rename=%s\n",$line[1],($line[2]-$line[3])*10.0, -$line[9]/2,$line[1]);
        printf OUT ("place G_DIPOLE By=%.8f x=-G_X_offset z=(G_Z_offset)+%.3f rotation=Y%.3f rename=%s\n",$line[4]/10,($line[2]-$line[3])*10.0,-$line[9]/2,$l
ine[1]);
        $rho=(10*$line[3])/($deg2rad*abs($line[9])); #Convert the bend radi cm-to-mm#
        printf OUT ("cornerarc C1 z=%.3f centerRadius=%.6f angle=icorrected_bend_ang1\n", ($line[2]-$line[3])*10.0, $rho);
        }
}

elsif (/^a/)
{
        printf OUT ("place Cell_RF1 z=%.3f rename=%s\n", ($line[2]-$line[3]/2)*10.0 , $line[1] );

}

elsif (/^w/)
{
        printf OUT ("place Cell_RF2 z=%.3f rename=%s\n", ($line[2]-$line[3]/2)*10.0 , $line[1] );

}

elsif (/^iIPM/)
{
printf OUT ("place Det z=%.2f rename=%s\n",($line[2]-$line[3]/2.)*10.0, $line[1]);
}

elsif (/^k/)
{

        if($line[7] == 90)
        {
printf OUT ("place Corrector By=%.3f z=%.2f rotation=Z90 rename=%s\n",$line[4]/10., ($line[2]-$line[3]/2.)*10.0, $line[1]);
        }
        elsif($line[7] == 0)
        {
printf OUT ("place Corrector By=%.3f z=%.2f rename=%s\n",$line[4]/10., ($line[2]-$line[3]/2.)*10.0, $line[1]);
        }
}


}
close(IN);
close(OUT);

OptiM32_HRRL_PositronDesign