Difference between revisions of "Gumstix Installation"
Jump to navigation
Jump to search
| (3 intermediate revisions by one other user not shown) | |||
| Line 6: | Line 6: | ||
Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are '''On'''. | Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are '''On'''. | ||
| − | |||
| − | |||
;<math>I^2C</math> Connection | ;<math>I^2C</math> Connection | ||
| − | Connecting to the | + | Connecting to the gum adapter(i2c board) |
{| border="1" |cellpadding="20" cellspacing="0 | {| border="1" |cellpadding="20" cellspacing="0 | ||
| Line 32: | Line 30: | ||
;Voltage supply | ;Voltage supply | ||
| + | |||
| + | {| border="1" |cellpadding="20" cellspacing="0 | ||
| + | |- | ||
| + | | Gum adapter || Voltage supply | ||
| + | |- | ||
| + | | <math>V_{cc}</math> || <math>out^+</math> | ||
| + | |- | ||
| + | | <math>V_{ground}</math>|| <math>out^-</math> | ||
| + | |} | ||
Gum adapter(<math>V_{cc}</math> && <math>V_{ground}</math>) should be connected to the voltage supply(~2.5 Volts). | Gum adapter(<math>V_{cc}</math> && <math>V_{ground}</math>) should be connected to the voltage supply(~2.5 Volts). | ||
| Line 38: | Line 45: | ||
From Gum adapter using network cable establish connection with BreakOut box. | From Gum adapter using network cable establish connection with BreakOut box. | ||
| + | |||
| + | [http://wiki.iac.isu.edu/index.php/User_talk:Didbtama Go Back] | ||
Latest revision as of 05:06, 8 December 2012
- Establishing Connection with Gumstix
The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web pageserial.
Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are On.
- Connection
Connecting to the gum adapter(i2c board)
| Cable side | Gumstix side |
| Blue | Yellow |
| White/Green | Red |
| White | Green |
| Green | Blue |
On Gumstix:
- Voltage supply
| Gum adapter | Voltage supply |
Gum adapter( && ) should be connected to the voltage supply(~2.5 Volts).
- BreakOut Box
From Gum adapter using network cable establish connection with BreakOut box.