Difference between revisions of "JLAB PLX LVDS"
Jump to navigation
Jump to search
(5 intermediate revisions by the same user not shown) | |||
Line 14: | Line 14: | ||
[[Image:PLX_input_and_output_pulses_1.png|300px]] | [[Image:PLX_input_and_output_pulses_1.png|300px]] | ||
+ | |||
+ | |||
+ | =3/17/09= | ||
+ | |||
+ | How to use Input register | ||
+ | |||
+ | need to write a paragraph here | ||
+ | |||
+ | ;1.) | ||
+ | -> s3610Status | ||
+ | |||
+ | STATUS for SIS3610 id 0 at base address 0x91003800 | ||
+ | ------------------------------------------------ | ||
+ | Interrupts Enabled - Mode = 0 (0:RORA 1:ROAK) | ||
+ | VME Interrupt Level: 5 Vector: 0xe0 | ||
+ | Sources Enabled: 0x1 Sources Valid: 0x0 | ||
+ | |||
+ | MODULE ID register = 0x36101de0 | ||
+ | |||
+ | STATUS register = 0x00110000 | ||
+ | User Led Enabled : 0 | ||
+ | User Output Status : 0x0 | ||
+ | Flip-Flops Enabled : 0x1 | ||
+ | Latch Strobe Status: 0x0 | ||
+ | |||
+ | Direct Output Register = 0x0000 | ||
+ | Direct Input Register = 0xfbfe | ||
+ | Latched Input Register = 0xfffe | ||
+ | value = 35 = 0x23 = '#' | ||
+ | |||
+ | |||
+ | ;2.) | ||
+ | -> s3610Status | ||
+ | |||
+ | STATUS for SIS3610 id 0 at base address 0x91003800 | ||
+ | ------------------------------------------------ | ||
+ | Interrupts Enabled - Mode = 0 (0:RORA 1:ROAK) | ||
+ | VME Interrupt Level: 5 Vector: 0xe0 | ||
+ | Sources Enabled: 0x1 Sources Valid: 0x0 | ||
+ | |||
+ | MODULE ID register = 0x36101de0 | ||
+ | |||
+ | STATUS register = 0x00110000 | ||
+ | User Led Enabled : 0 | ||
+ | User Output Status : 0x0 | ||
+ | Flip-Flops Enabled : 0x1 | ||
+ | Latch Strobe Status: 0x0 | ||
+ | |||
+ | Direct Output Register = 0x0000 | ||
+ | Direct Input Register = 0x79fe | ||
+ | Latched Input Register = 0xfffe | ||
+ | value = 35 = 0x23 = '#' | ||
+ | |||
+ | |||
+ | |||
+ | ;3.) | ||
+ | -> s3610Status | ||
+ | |||
+ | STATUS for SIS3610 id 0 at base address 0x91003800 | ||
+ | ------------------------------------------------ | ||
+ | Interrupts Enabled - Mode = 0 (0:RORA 1:ROAK) | ||
+ | VME Interrupt Level: 5 Vector: 0xe0 | ||
+ | Sources Enabled: 0x1 Sources Valid: 0x0 | ||
+ | |||
+ | MODULE ID register = 0x36101de0 | ||
+ | |||
+ | STATUS register = 0x00110000 | ||
+ | User Led Enabled : 0 | ||
+ | User Output Status : 0x0 | ||
+ | Flip-Flops Enabled : 0x1 | ||
+ | Latch Strobe Status: 0x0 | ||
+ | |||
+ | Direct Output Register = 0x0000 | ||
+ | Direct Input Register = 0x79fe | ||
+ | Latched Input Register = 0x79fe | ||
+ | value = 35 = 0x23 = '#' | ||
[http://wiki.iac.isu.edu/index.php/VME_modules Go back] | [http://wiki.iac.isu.edu/index.php/VME_modules Go back] | ||
[[VME_modules]] Go back | [[VME_modules]] Go back |
Latest revision as of 01:32, 18 March 2009
A VME Modules designed by Ed Jastrzembski at JLAB
Description:
This PLX board will be built on a Flex I/O format that Ed Jastrzembski developed many years ago. The VME (back end) manages the interface to the bus, and controls two front end 'ports' that can be input or output units.
3/17/09
How to use Input register
need to write a paragraph here
- 1.)
-> s3610Status STATUS for SIS3610 id 0 at base address 0x91003800 ------------------------------------------------ Interrupts Enabled - Mode = 0 (0:RORA 1:ROAK) VME Interrupt Level: 5 Vector: 0xe0 Sources Enabled: 0x1 Sources Valid: 0x0
MODULE ID register = 0x36101de0
STATUS register = 0x00110000 User Led Enabled : 0 User Output Status : 0x0 Flip-Flops Enabled : 0x1 Latch Strobe Status: 0x0
Direct Output Register = 0x0000 Direct Input Register = 0xfbfe Latched Input Register = 0xfffe value = 35 = 0x23 = '#'
- 2.)
-> s3610Status
STATUS for SIS3610 id 0 at base address 0x91003800 ------------------------------------------------ Interrupts Enabled - Mode = 0 (0:RORA 1:ROAK) VME Interrupt Level: 5 Vector: 0xe0 Sources Enabled: 0x1 Sources Valid: 0x0
MODULE ID register = 0x36101de0
STATUS register = 0x00110000 User Led Enabled : 0 User Output Status : 0x0 Flip-Flops Enabled : 0x1 Latch Strobe Status: 0x0
Direct Output Register = 0x0000 Direct Input Register = 0x79fe Latched Input Register = 0xfffe value = 35 = 0x23 = '#'
- 3.)
-> s3610Status
STATUS for SIS3610 id 0 at base address 0x91003800 ------------------------------------------------ Interrupts Enabled - Mode = 0 (0:RORA 1:ROAK) VME Interrupt Level: 5 Vector: 0xe0 Sources Enabled: 0x1 Sources Valid: 0x0
MODULE ID register = 0x36101de0
STATUS register = 0x00110000 User Led Enabled : 0 User Output Status : 0x0 Flip-Flops Enabled : 0x1 Latch Strobe Status: 0x0
Direct Output Register = 0x0000 Direct Input Register = 0x79fe Latched Input Register = 0x79fe value = 35 = 0x23 = '#'
Go back VME_modules Go back