Difference between revisions of "PosRun 12 09 2013"
Jump to navigation
Jump to search
(Created page with " Positrons_Using_40Mev_Linac#10.2F14.2F13") |
|||
| Line 1: | Line 1: | ||
| + | |||
| + | ==In-flight== | ||
| + | |||
| + | {| border="1" |cellpadding="20" cellspacing="0 | ||
| + | |- | ||
| + | | Run # || Run Duration (s) || Configuration | ||
| + | |- | ||
| + | | 6502 || min s (54297 pulses) || same as above except: REmoved Al brick beam stop | ||
| + | |} | ||
| + | |||
| + | ===40 MeV on Tungsten=== | ||
| + | |||
| + | 40 MeV electrons are hitting the positron production Tungsten target | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | {| border="1" |cellpadding="20" cellspacing="0 | ||
| + | |- | ||
| + | | Run # || Run Duration (s) || Configuration | ||
| + | |- | ||
| + | | 6503 || 3 min 46 s ( pulses) || Dipoles in positron mode. Al Brick in along 8 inch length | ||
| + | |- | ||
| + | | 6504 || min s ( pulses) || same as previous run, Al brick OUT | ||
| + | |- | ||
| + | | 6505 || min s ( pulses) || same as previous run, Dipoles in Electron mode, [[File:r6500-04-05_ch3.png| 200 px]] | ||
| + | |- | ||
| + | | 6506 || min s ( pulses) || same as previous run, Selection Magnet bending electrons up positioned after 50 micron Ti vacuum window, [[File:r6505-06_ch3.png| 200 px]] | ||
| + | |- | ||
| + | | 6507 || min s ( pulses) || same as previous run, dipoles set to positron mode and selection magnet rotated 180 degrees so positrons bend up, | ||
| + | |- | ||
| + | | 6508 || min s ( pulses) || same as previous run:increase voltage from -700 to -850 | ||
| + | |- | ||
| + | | 6509 || min s ( pulses) || same as previous run, installed 2" thick graphite hardener | ||
| + | |- | ||
| + | | 6510 || min s ( pulses) || same as previous run, removed graphite hardener and selection magnet, returned to dipoles in electron mode, | ||
| + | |} | ||
Revision as of 17:24, 9 December 2013
In-flight
| Run # | Run Duration (s) | Configuration |
| 6502 | min s (54297 pulses) | same as above except: REmoved Al brick beam stop |
40 MeV on Tungsten
40 MeV electrons are hitting the positron production Tungsten target
| Run # | Run Duration (s) | Configuration |
| 6503 | 3 min 46 s ( pulses) | Dipoles in positron mode. Al Brick in along 8 inch length |
| 6504 | min s ( pulses) | same as previous run, Al brick OUT |
| 6505 | min s ( pulses) | same as previous run, Dipoles in Electron mode, 
|
| 6506 | min s ( pulses) | same as previous run, Selection Magnet bending electrons up positioned after 50 micron Ti vacuum window, 
|
| 6507 | min s ( pulses) | same as previous run, dipoles set to positron mode and selection magnet rotated 180 degrees so positrons bend up, |
| 6508 | min s ( pulses) | same as previous run:increase voltage from -700 to -850 |
| 6509 | min s ( pulses) | same as previous run, installed 2" thick graphite hardener |
| 6510 | min s ( pulses) | same as previous run, removed graphite hardener and selection magnet, returned to dipoles in electron mode, |