Difference between revisions of "10312013 TestRun"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| + | =Goals= | ||
| + | |||
| + | Use NaI to measure Y-88 coincidence lines of 1836 and 898 keV | ||
| + | |||
=Runlist= | =Runlist= | ||
{| border="1" |cellpadding="20" cellspacing="0 | {| border="1" |cellpadding="20" cellspacing="0 | ||
Revision as of 17:16, 31 October 2013
Goals
Use NaI to measure Y-88 coincidence lines of 1836 and 898 keV
Runlist
| Run | Description | |
| 6559 | Coincidence run with Na-22 1 uCi source # 129742, ADC7 = HpGe, ADC3 = NaI, TDC16 = HpGe, TDC19 = NaI, Na-22's 1.2 keV photon is in channel 3600 for the HpGe detector and channel 500 for the NaI; need to decrease gain on HpGe so Y-88's 1.8 keV photon is in the ADC range | |
| 6560 | Changed HpGe spec amp integration from 0.5 usec shaping time to 0.25 and ran in singles mode | |
| 6561 | Running in coincidence mode, rate changed from about 70 Hz to about 2 Hz | |
| 6562 | Running in OR mode with activated Y-88 sample #130100-010 |
calibrate with Na-22 (511,1200), Co-60 (1.2, 1.3), Mn-54 (0.8)
Calibration runs
Cd=109 has coincidence lines at 203 & 250 keV
| Run | Description | |
| 6567 | Singles run with only NaI detector and Co-60 source | |
| 6568 | singles runs with only HpGe detector and Co-60 source | |
| 6569 | OR mode, both detectors, 3k DAQ trigger rate. Co-60 1 uCi source # 129739 | |
| 6570 | Running in OR mode with Mn-54 source # 700 Hz | |
| 6571 | Running in OR mode with only NaI in trigger and Mn-54 source, increased threshold from 10 mV to 40 mV to count more high energy photons |