Difference between revisions of "R1S5 SL1 HVB1 BurnIn"
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
|- | |- | ||
| 06/25/13 || 15:22 || 536 || 1500 || -750 || 4.6 || 4.7 || Current appears stable +/- 0.2 microamps for at least 30 seconds after finishing voltage rise. | | 06/25/13 || 15:22 || 536 || 1500 || -750 || 4.6 || 4.7 || Current appears stable +/- 0.2 microamps for at least 30 seconds after finishing voltage rise. | ||
+ | |- | ||
+ | | 06/25/13 || 15:29 || 536 || 1500 || -750 || 4.1 || 4.2 || |
Revision as of 21:30, 25 June 2013
Date | Time (24h) | Guard (V) | Sense (V) | Field (V) | Sense ( | A)Field ( | A)comments |
06/25/13 | 15:05 | 30 | 40 | -50 | 0.0 | 0.025 | Guard current is at 15.9 microamps. Have never observed it above 0.000 before. Turned off voltage to check cabling setup. |
06/25/13 | 15:19 | 30 | 40 | -50 | 0.0 | 0.025 | Found a grounding strap attached to the HVB side of Board 1. Removed and torqued down the screw it was on. Guard current is normal now. Field/sense current stabilized within 30 seconds to this reading. |
06/25/13 | 15:22 | 536 | 1500 | -750 | 4.6 | 4.7 | Current appears stable +/- 0.2 microamps for at least 30 seconds after finishing voltage rise. |
06/25/13 | 15:29 | 536 | 1500 | -750 | 4.1 | 4.2 |