Difference between revisions of "Beam Test Jul 25 2012"
Jump to navigation
Jump to search
| Line 79: | Line 79: | ||
|- | |- | ||
|- | |- | ||
| − | | 3664 || in || in || DL & DR & GunTrig || 1060V || 1080V || 100 || 13:35:45|| ||45.5 events/s | + | | 3664 || in || in || DL & DR & GunTrig || 1060V || 1080V || 100 || 13:35:45|| 15:53:00 ???||45.5 events/s |
| + | |- | ||
| + | | 3665 || in || in || (DL & GunTrig) or (DR & GunTrig) || 1060V || 1080V || 100 || 13:53:24|| ||51.1 events/s | ||
|- | |- | ||
|} | |} | ||
Revision as of 19:53, 25 July 2012
Tune
| Energy Switch | Out (High En) |
| Solenoid 1 | 9.1 A |
| Solenoid 2 | 1.3 A |
| Gun Hor | -0 A |
| Gun Ver | +0.1 A |
| Output Hor | -0.3 A |
| Output Ver | -0 A |
| Rep Rate | 11 |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 10 (Knob Setting) |
| RF frequency | 2856.323 MHz |
| Modulator HV Power Supply | 4.19 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | -3 |
| Q2 (A) | +0.8 |
| Q3 (A) | +2 |
| Q4 (A) | -2 |
| Q5 (A) | +0.8 |
| Q6 (A) | +2 |
| Current at FC0 | 90 mA |
e-
quad settings after T1 (Target 1, positron production target).
D1 D2 q4 q5 q6 q7 q8 q9 q10 4.2 4.41 +6.5 -3.7 -1.1 +1.5 +0.2 +0.3 +0.0
e+
quad settings after T1 (Target 1, positron production target).
D1 D2 q4 q5 q6 q7 q8 q9 q10 -4.2 -4.41 -6.5 +3.7 +1.1 -1.5 -0.2 -0.3 -0.0
DAQ runs
Beam left is Det2, Beam right is Det3.
run# T1 T2H V-D2L HV-D3R Reprate start end Int Rate 3663 in in 1060V 1080V 11 13:02:08 13:25:14 4.4757 events/s
Detector3 was very quite, so I replaced Detector3 with Detector1.
| run# | T1 | T2 | logic | HV-D2L | HV-D1R | Reprate | start | stop | Int Rate |
| 3663 | in | in | DL & DR & GunTrig | 1060V | 1080V | 11 | 13:02:08 | 13:25:14 | 4.4757 events/s |
Detector3 was very quite, so I replaced Detector3 with Detector1.
| 3664 | in | in | DL & DR & GunTrig | 1060V | 1080V | 100 | 13:35:45 | 15:53:00 ??? | 45.5 events/s |
| 3665 | in | in | (DL & GunTrig) or (DR & GunTrig) | 1060V | 1080V | 100 | 13:53:24 | 51.1 events/s |