Difference between revisions of "September 22, 2011"
Line 90: | Line 90: | ||
! scope="col" width="6.%" | Beam | ! scope="col" width="6.%" | Beam | ||
! scope="col" width="6.%" | Dump magnet | ! scope="col" width="6.%" | Dump magnet | ||
− | ! scope="col" width="6.%" | | + | ! scope="col" width="6.%" | Collim |
! scope="col" width="6.%" | add coll | ! scope="col" width="6.%" | add coll | ||
! scope="col" width="6.%" | Hardener 1" Al | ! scope="col" width="6.%" | Hardener 1" Al |
Revision as of 17:37, 22 September 2011
Beam Parameters:
- current 140 mA
- pulse width 2 ns
- rep rate 180 Hz
- E = 25 MeV
Initial Test for Verification
Run # | Beam | Dump magnet | Collim | add coll | Hardener 1" Al | Radiator 25 um Al | Target | Comments |
---|---|---|---|---|---|---|---|---|
2527 | Up 90A |
In | Open | In | Yes | In | D2O bottle | Test radiator in/out.
R(bottom) = 2.09E-4 n/pulse -> × 180 Hz × 60 sec/min = 2.26 n/min |
2528 | Up 90A |
In | Open | In | Yes | Out | D2O bottle | Test radiator in/out.
R(bottom) = 7.7E-6 n/pulse -> × 180 Hz × 60 sec/min = 0.083 n/min |
2530 | Down 86A |
In | Open | In | Yes | In | D2O bottle | Test radiator in/out.
R(bottom) = 1.7E-4 n/pulse -> × 180 Hz × 60 sec/min = 1.84 n/min |
2531 | Down 86A |
In | Open | In | Yes | Out | D2O bottle | Test radiator in/out.
R(bottom) = 2.28E-5 n/pulse -> × 180 Hz × 60 sec/min = 0.25 n/min |
2532 | Down 86A |
In | Open | In | No | Out | D2O bottle | Test radiator in/out.
R(bottom) = 2.45E-5 n/pulse -> × 180 Hz × 60 sec/min = 0.26 n/min |
2533 | Up 90A |
In | Open | In | No | Out | D2O bottle | Test radiator in/out.
R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = 0 n/min |
2534 | Up 90A |
In | Open | In | No | Out | D2O bottle | Test radiator in/out. Radiator out adjusted to be between two radiators
R(bottom) = 8.6E-6 n/pulse -> × 180 Hz × 60 sec/min = 0.09 n/min |
2535 | Up 90A |
In | Open | In | No | In | D2O bottle | Test radiator in/out.
R(bottom) = 2.5E-4 n/pulse -> × 180 Hz × 60 sec/min = 2.70 n/min |
2536 | Up 90A |
In | Open | In | No | In | D2O bottle | Test radiator in/out. Rerun 2535
R(bottom) = 2.58E-4 n/pulse -> × 180 Hz × 60 sec/min = 2.79 n/min |
2537 | Down 86A |
In | Open | In | No | In | D2O bottle | Test radiator in/out.
R(bottom) = 3.4E-4 n/pulse -> × 180 Hz × 60 sec/min = 3.67 n/min |
2538 | Down 86A |
In | Open | In | No | Out | D2O bottle | Test radiator in/out.
R(bottom) = 9.9E-6 n/pulse -> × 180 Hz × 60 sec/min = 0.11 n/min |
Production Runs
Run # | Beam | Dump magnet | Collim | add coll | Hardener 1" Al | Radiator 25 um Al | Target | Comments |
---|---|---|---|---|---|---|---|---|
2539 | Up 90A |
In | Open | In | No | In | D2O bottle | Long production run: -- pulses (-- minute run) R(bottom) = -- n/pulse -> × 180 Hz × 60 sec/min = -- n/min |
25-- | Down 86A |
In | Open | In | No | In | D2O bottle | Long production run: -- pulses (-- minute run) R(bottom) = -- n/pulse -> × 180 Hz × 60 sec/min = -- n/min |
25-- | Down 86A |
In | Open | In | Yes | Out | D2O bottle | Long production run: -- pulses (-- minute run) R(bottom) = -- n/pulse -> × 180 Hz × 60 sec/min = -- n/min |
25-- | Down 86A |
In | Open | In | Yes | In | None | Long production run: -- pulses (-- minute run) R(bottom) = -- n/pulse -> × 180 Hz × 60 sec/min = -- n/min |