TF EIMLab17 Writeup

The JFET (Junction Field Effect Transistor n-channel)

File:JFET MPF102 DataSheet.pdf

1.) Complete the table below for the JFET.

Only [math]R_D[/math] is not know. If we want currents up to 5 mA using a 10 Volt power supply then [math]R_D[/math] should be 2 k[math]\Omega[/math]

Parameter	Value
[math] I_{DSS}[/math]
[math]V_{GS(off)}[/math]
[math]P_{max}[/math]
[math]R_G[/math]	3.3 M[math]\Omega[/math]
[math]R_D[/math]
[math]y_{fs}[/math]
[math]y_{is}[/math]
[math]y_{os}[/math]

2.)Construct the JFET circuit below.

3.)Plot measurements of [math]I_D[/math] -vs- [math]V_{DS}[/math] by varying [math]V_{dd}[/math] for [math]\left | V_{GS}\right |[/math] = 0, 0.5, 1.0, 1.5 V. (40 pnts)

4.)Plot[math] I_D[/math] -vs- [math]V_{GS}[/math] (30 pnts)

5.)Calculate [math]y_{fs}[/math] for your JFET (20 pnts)

Question

1. Does [math]y_{fs}[/math] depend on[math] I_D[/math]? (10 pnts)

Forest_Electronic_Instrumentation_and_Measurement