Lab 17 TF EIM: Difference between revisions

From New IAC Wiki
Jump to navigation Jump to search
Oborn (talk | contribs)
No edit summary
Foretony (talk | contribs)
No edit summary
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
The JFET (Junction Field Effect Transistor)
The JFET (Junction Field Effect Transistor n-channel)




#Construct the JFET circuit below.
[[File:JFET_MPF102_Pinouts.png]]
#Look up the <math>y</math> parameters of your JFET.
 
#Plot measurements of <math>I_D</math> -vs- <math>V_{DS}</math> by varying <math>V_{dd}</math> for <math>\left | V_{GS}\right |</math> = 0, 0.5, 1.0, 1.5 V. (40 pnts)
 
#Plot<math> I_D</math> -vs- <math>V_{GS}</math> (30 pnts)
[[File:JFET_MPF102_DataSheet.pdf]]
#Calculate <math>y_{fs}</math> for your JFET (20 pnts)
 
1.) Complete the table below for the JFET.
 
 
{| border="3"  cellpadding="20" cellspacing="0"
|Parameter ||  Value
|-
|<math> I_{DSS}</math> ||
|-
|<math>V_{GS(off)}</math> ||
|-
|<math>P_{max}</math> ||
|-
|<math>R_G</math> || 3.3 M<math>\Omega</math>
|-
|<math>R_D</math> ||
|-
|<math>y_{fs}</math> ||
|-
|<math>y_{is}</math> ||
|-
|<math>y_{os}</math> ||
|-
|}
 
2.)Construct the JFET circuit below.
 
[[File:TF_EIM_Lab17Circuit.png| 200 px]]
 
3.)Plot measurements of <math>I_D</math> -vs- <math>V_{DS}</math> by varying <math>V_{dd}</math> for <math>\left | V_{GS}\right |</math> = 0, 0.5, 1.0, 1.5 V. (40 pnts)
 
4.)Plot<math> I_D</math> -vs- <math>V_{GS}</math> (30 pnts)
 
5.)Calculate <math>y_{fs}</math> for your JFET (20 pnts)


=Question=
=Question=

Latest revision as of 23:53, 5 April 2011

The JFET (Junction Field Effect Transistor n-channel)



File:JFET MPF102 DataSheet.pdf

1.) Complete the table below for the JFET.


Parameter Value
[math]\displaystyle{ I_{DSS} }[/math]
[math]\displaystyle{ V_{GS(off)} }[/math]
[math]\displaystyle{ P_{max} }[/math]
[math]\displaystyle{ R_G }[/math] 3.3 M[math]\displaystyle{ \Omega }[/math]
[math]\displaystyle{ R_D }[/math]
[math]\displaystyle{ y_{fs} }[/math]
[math]\displaystyle{ y_{is} }[/math]
[math]\displaystyle{ y_{os} }[/math]

2.)Construct the JFET circuit below.

3.)Plot measurements of [math]\displaystyle{ I_D }[/math] -vs- [math]\displaystyle{ V_{DS} }[/math] by varying [math]\displaystyle{ V_{dd} }[/math] for [math]\displaystyle{ \left | V_{GS}\right | }[/math] = 0, 0.5, 1.0, 1.5 V. (40 pnts)

4.)Plot[math]\displaystyle{ I_D }[/math] -vs- [math]\displaystyle{ V_{GS} }[/math] (30 pnts)

5.)Calculate [math]\displaystyle{ y_{fs} }[/math] for your JFET (20 pnts)

Question

  1. Does [math]\displaystyle{ y_{fs} }[/math] depend on[math]\displaystyle{ I_D }[/math]? (10 pnts)

Forest_Electronic_Instrumentation_and_Measurement