Lab 13 TF EIM

DC Transistor Curves

Media:2N3906.pdf

Transistor circuit

1.) Identify the type (n-p-n or p-n-p) of transistor you are using and fill in the following specifications.

Value	Description
	Collector-Base breakdown voltage
	Emitter-Base Breakdown Voltage
	Maximum Collector Voltage
	Maximum Collector Current
	Transistor Power rating([math]P_{Max}[/math])
	DC current gain [math]h_{FE}( I_C, V_{CE})[/math]

2.) Construct the circuit below according to the type of transistor you have.

3.) Measure the emitter current [math]I_E[/math] for several values of [math]V_{CE}[/math] by changing [math]V_{CC}[/math] such that the base current [math]I_B = 2 \mu[/math] A is constant. [math]I_B \approx \frac{V_{bb}-V_{BE}}{R_B}[/math]

4.) Repeat the previous measurements for [math]I_B \approx 5 \mbox{ and } 10 \mu[/math] A. Remember to keep [math]I_CV_{CE} \lt P_{max}[/math] so the transistor doesn't burn out

5.) Graph [math]I_C[/math] -vs- [math]V_{CE}[/math] for each value of [math]I_B[/math] and [math]V_{CC}[/math] above. (40 pnts)

6.) Overlay points from the transistor's data sheet on the graph in part 5.).(10 pnts)

Questions

1. What is [math]h_{FE}[/math] or [math]\beta[/math] for the transistor? (10 pnts)
2. What is [math]\alpha[/math] for the transistor?(10 pnts)
3. The base must always be more _________(________) than the emitter for a npn (pnp)transistor to conduct I_C.(10 pnts)
4. For a transistor to conduct I_C the base-emitter junction must be ___________ biased.(10 pnts)
5. For a transistor to conduct I_C the collector-base junction must be ___________ biased.(10 pnts)

Forest_Electronic_Instrumentation_and_Measurement