Ribbon Cable Attenuation Measurements

Go Back

Attenuation of Ribbon Cable measurements

Experimental Set Up

setup without Ribbon Cable	setup with Ribbon Cable

Measurements

Pulse width	[math]V_1[/math]	[math]V_2[/math]	Attenuation, %	Comments
[math]100\ \mu s[/math]	[math]5.0\ V[/math]	[math]4.5\ V[/math]	10 %
[math]10\ \mu s[/math]	[math]5.0\ V[/math]	[math]4.2\ V[/math]	16 %
[math]1\ \mu s[/math]	[math]5.0\ V[/math]	[math]3.0\ V[/math]	40 %	see pictures about change of pulse shape
[math]100\ ns[/math]	[math]5.0\ V[/math]	[math]2.8\ V[/math]	44 %	see pictures about change of pulse shape
[math]30\ ns[/math]	[math]4.0\ V[/math]	[math]1.8\ V[/math]	55 %	see pictures about change of pulse shape

[math]V_1[/math] - without Ribbon Cable
[math]V_2[/math] - with Ribbon Cable

Pictures about change of pulse shape

[math]1\ \mu s[/math] pulse without Ribbon Cable	[math]1\ \mu s[/math] pulse with Ribbon Cable

[math]100\ ns[/math] pulse without Ribbon Cable	[math]100\ ns[/math] pulse with Ribbon Cable

[math]30\ ns[/math] pulse without Ribbon Cable	[math]30\ ns[/math] pulse with Ribbon Cable

Signal Delay in Ribbon Cable measurements

Experimental Set Up

setup without Ribbon Cable	setup with Ribbon Cable

Measurements

2 pulses without Ribbon Cable	2 pulses with Ribbon Cable

We have about 170 ns delay of signal in Ribbon Cable for 100 ns pulse. 
For other pulse width the delay is about the same.

Go Back