Difference between revisions of "Gumstix Installation"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| + | ;Establishing Connection with Gumstix | ||
<p>The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web page[http://www.gumstix.net/Software/view/Developer-how-to-s/Reflashing-using-a-serial-connection/111.html serial]. | <p>The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web page[http://www.gumstix.net/Software/view/Developer-how-to-s/Reflashing-using-a-serial-connection/111.html serial]. | ||
[[File:Gumstix Serial Alignment.jpg|thumb|none|200px|Correct alignment of the TTL RS232 adapter]] | [[File:Gumstix Serial Alignment.jpg|thumb|none|200px|Correct alignment of the TTL RS232 adapter]] | ||
| Line 7: | Line 8: | ||
Gumstix username: root<br> | Gumstix username: root<br> | ||
Password:c0d/\2.0 | Password:c0d/\2.0 | ||
| + | |||
| + | |||
| + | ;<math>I^2C</math> Connection | ||
Revision as of 21:09, 20 July 2009
- Establishing Connection with Gumstix
The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web pageserial.
Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are On.
Gumstix username: root
Password:c0d/\2.0
- Connection