Difference between revisions of "Plastic Scintillator Calculation"

From New IAC Wiki
Jump to navigation Jump to search
 
(46 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back]
 +
 
Below is the calculations done to determine the probability of pair production depending on thickness of the scintillator.
 
Below is the calculations done to determine the probability of pair production depending on thickness of the scintillator.
  
−
Molecules per <math> cm^3 = \frac{grams CH_{2}}{cm^3} * \frac{mol}{gram} * \frac{N[A]}{mol} </math> (NOTE: <math> \frac{gram}{cm^3} </math> is just the density of the scintillator material and N[A] is Avagodro's number)
+
Molecules per <math> cm^3 = \frac{grams CH_{2}}{cm^3} * \frac{mol}{gram} * {N[A]}</math> (NOTE: <math> \frac{gram}{cm^3} </math> is just the density of the scintillator material and N[A] is Avogadro's number)
  
 
Molecules per <math> cm^2 (K) = \frac{Molecules}{cm^3} * Thickness </math>
 
Molecules per <math> cm^2 (K) = \frac{Molecules}{cm^3} * Thickness </math>
Line 20: Line 22:
 
For hydrogen <math>\sigma_{elec} = 1.716*10^{-3} barns</math> or <math>1.716*10^{-27}cm^2</math>
 
For hydrogen <math>\sigma_{elec} = 1.716*10^{-3} barns</math> or <math>1.716*10^{-27}cm^2</math>
  
−
Avagodro's number <math> = \frac{6.022*10^{23}molecules}{mol}</math>
+
Avogadro's number <math> = \frac{6.022*10^{23}molecules}{mol}</math>
 +
 
 +
Molecular formula for PVT <math> = C_{10}H_{11} </math>
 +
 
 +
Density of polyvinyl toluene (a common scintillator material) <math> = \frac{1.02grams}{cm^3}</math> (NOTE: this value is from Rexon RP 200 [http://www.rexon.com/RP_200.pdf])
  
−
Density of polyvinyl toluene (a common scintillator material) <math> = \frac{1.02grams}{cm^3}</math>
+
or is it <math>\rho_{BC408} = \frac{1.032grams}{cm^3}</math> H/C = 11/10  [http://arxiv.org/abs/nucl-ex/0502006] (TF)
  
 
For the sample calculation the thickness will be set to 1 cm just to get probability per cm
 
For the sample calculation the thickness will be set to 1 cm just to get probability per cm
Line 29: Line 35:
 
So entering all the numbers into the 4 initial equations gives the following answers:
 
So entering all the numbers into the 4 initial equations gives the following answers:
  
−
Molecules per <math> cm^3 = \frac{1.02g PVT}{cm^3} * \frac{1 mol}{14 g} * \frac{6.022*10^{23}molecules}{mol} = \frac{4.387*10^{22}molecules PVT}{cm^3} </math>  
+
Molecules per <math> cm^3 = \frac{1.02g PVT}{cm^3} * \frac{1 mol}{131 g} * \frac{6.022*10^{23}molecules}{mol} = \frac{4.689*10^{21}molecules PVT}{cm^3} </math>
 +
 
 +
Molecules per <math> cm^2 (K) = \frac{4.689*10^{21}molecules PVT}{cm^3} * 1cm = \frac{4.689*10^{21}molecules PVT}{cm^2} </math>
 +
 
 +
Weighted cross-section <math> (\sigma_w) = (10*(1.030*10^{-26}cm^2 + 9.645*10^{-26}cm^2)) + (11*(1.716*10^{-27}cm^2 + 2.688*10^{-27}cm^2)) = 1.116*10^{-24}cm^2</math>
 +
 
 +
Probability of interaction (%) <math>= 1.116*10^{-24}cm^2 * \frac{4.689*10^{21}molecules PVT}{cm^2} * 100% = 0.5233%</math>
 +
 
 +
Doing the same calculations using the Bicron BC 408 PVT with anthracene [http://webh09.cern.ch/ajbell/Documents/Optical_Fibres/BICRON%20BC408.pdf] for the material yields a probability of <math>0.5294%</math>
 +
 
 +
= A different way to calculate probability of interaction =
 +
 
 +
I checked out a few of the physics material supply sites and most of them list with their products the amounts of each individual atom per <math> cm^3</math>. Therefore there is a quicker way to calculate the probability of interaction which is listed below.
 +
 
 +
 
 +
Probability of interaction per cm thickness<math> = ((\frac{NumCarbonAtoms}{cm^3} *(\sigma_{elec}C + \sigma_{nucleus}C)) + (\frac{NumHydrogenAtoms}{cm^3} *(\sigma_{elec}H + \sigma_{nucleus}H)))*100%</math>
 +
 
 +
Using this method of calculation for Rexon RP 200 yields a probability <math> = \frac{0.5234%}{cm}</math>  
  
−
Molecules per <math> cm^2 (K) = \frac{4.387*10^{22}molecules PVT}{cm^3} * 1cm = \frac{4.387*10^{22}molecules PVT}{cm^2} </math>
+
Using this method for Bicron BC 408 yields a probabiltiy <math> = \frac{0.5303%}{cm} </math>
  
−
Weighted cross-section <math> (\sigma_w) = (1.030*10^{-26}cm^2 + 9.645*10^{-26}cm^2) + 2(1.716*10^{-27}cm^2 + 2.688*10^{-27}cm^2) = 1.556*10^{-25}cm^2</math>
 
  
 
[http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back]
 
[http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back]

Latest revision as of 18:11, 5 February 2009

Go Back

Below is the calculations done to determine the probability of pair production depending on thickness of the scintillator.

Molecules per [math] cm^3 = \frac{grams CH_{2}}{cm^3} * \frac{mol}{gram} * {N[A]}[/math] (NOTE: [math] \frac{gram}{cm^3} [/math] is just the density of the scintillator material and N[A] is Avogadro's number)

Molecules per [math] cm^2 (K) = \frac{Molecules}{cm^3} * Thickness [/math]

Weighted cross-section [math] (\sigma_w) = (\sigma_{elec}C + \sigma_{nucleus}C) + 2(\sigma_{elec}H + \sigma_{nucleus}H)[/math]

Probability of interaction (%) [math]= \sigma_w * K * 100%[/math]


All cross sections listed here are pair production cross-sections

For carbon [math]\sigma_{nucleus} = 9.645*10^{-2} barns[/math] or [math]9.645*10^{-26}cm^2[/math]

For carbon [math]\sigma_{elec} = 1.030*10^{-2} barns[/math] or [math]1.030*10^{-26}cm^2[/math]

For hydrogen [math]\sigma_{nucleus} = 2.688*10^{-3} barns[/math] or [math]2.688*10^{-27}cm^2[/math]

For hydrogen [math]\sigma_{elec} = 1.716*10^{-3} barns[/math] or [math]1.716*10^{-27}cm^2[/math]

Avogadro's number [math] = \frac{6.022*10^{23}molecules}{mol}[/math]

Molecular formula for PVT [math] = C_{10}H_{11} [/math]

Density of polyvinyl toluene (a common scintillator material) [math] = \frac{1.02grams}{cm^3}[/math] (NOTE: this value is from Rexon RP 200 [1]) 

or is it [math]\rho_{BC408} = \frac{1.032grams}{cm^3}[/math]  H/C = 11/10  [2] (TF)

For the sample calculation the thickness will be set to 1 cm just to get probability per cm


So entering all the numbers into the 4 initial equations gives the following answers:

Molecules per [math] cm^3 = \frac{1.02g PVT}{cm^3} * \frac{1 mol}{131 g} * \frac{6.022*10^{23}molecules}{mol} = \frac{4.689*10^{21}molecules PVT}{cm^3} [/math]

Molecules per [math] cm^2 (K) = \frac{4.689*10^{21}molecules PVT}{cm^3} * 1cm = \frac{4.689*10^{21}molecules PVT}{cm^2} [/math]

Weighted cross-section [math] (\sigma_w) = (10*(1.030*10^{-26}cm^2 + 9.645*10^{-26}cm^2)) + (11*(1.716*10^{-27}cm^2 + 2.688*10^{-27}cm^2)) = 1.116*10^{-24}cm^2[/math]

Probability of interaction (%) [math]= 1.116*10^{-24}cm^2 * \frac{4.689*10^{21}molecules PVT}{cm^2} * 100% = 0.5233%[/math]

Doing the same calculations using the Bicron BC 408 PVT with anthracene [3] for the material yields a probability of [math]0.5294%[/math]

A different way to calculate probability of interaction

I checked out a few of the physics material supply sites and most of them list with their products the amounts of each individual atom per [math] cm^3[/math]. Therefore there is a quicker way to calculate the probability of interaction which is listed below.


Probability of interaction per cm thickness[math] = ((\frac{NumCarbonAtoms}{cm^3} *(\sigma_{elec}C + \sigma_{nucleus}C)) + (\frac{NumHydrogenAtoms}{cm^3} *(\sigma_{elec}H + \sigma_{nucleus}H)))*100%[/math]

Using this method of calculation for Rexon RP 200 yields a probability [math] = \frac{0.5234%}{cm}[/math]

Using this method for Bicron BC 408 yields a probabiltiy [math] = \frac{0.5303%}{cm} [/math]


Go Back

Retrieved from "https://wiki.iac.isu.edu/index.php?title=Plastic_Scintillator_Calculation&oldid=40832"