Difference between revisions of "CAEN V1495 IO"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
= ROC lib= | = ROC lib= | ||
| + | |||
| + | ==compile library== | ||
To compile the ROC library I executed the following command within the subdirectory containing the v1495.c file | To compile the ROC library I executed the following command within the subdirectory containing the v1495.c file | ||
| − | ccppc -fno-builtin -fno-for-scope -fstrength-reduce -mlongcall -mcpu=604 -DCPU=PPC604 -DVXWORKS -D_GNU_TOOL -DVXWORKSPPC -I/usr/local/coda/2.5/common/include/ -I../h -c -o v1495Lib.o -i v1495.c | + | ccppc -fno-builtin -fno-for-scope -fstrength-reduce -mlongcall -mcpu=604 -DCPU=PPC604 -DVXWORKS -D_GNU_TOOL -DVXWORKSPPC -I/usr/local/coda/2.5/common/include/ -I../h -c -o v1495Lib.o -i v1495.c |
| + | |||
| + | |||
| + | == load library onto the ROC== | ||
| + | |||
| + | I then copies the library v1495Lib.o into my ROC library subdirectory which is where the ROC is pooing at boot up | ||
| + | |||
| + | /home/daq/CODA/ROClibs/libs | ||
| + | |||
| + | I loaded the library by hand by typing the following at the ROC console | ||
| + | |||
| + | -> ld < v1495Lib.o | ||
| + | value = 268430512 = 0xfffecb0 | ||
=Setting address= | =Setting address= | ||
Revision as of 20:37, 8 April 2009
Readout code
V1
The ZIP file below contains the HDL source code to download into the V1495
http://www.physics.isu.edu/~tforest/DAQ/GEMReadout_V1495Source_Rev1_0.zip
The ZIP file below contains the ROC library
http://www.physics.isu.edu/~tforest/DAQ/GEMReadout_VxWorkxSource_11_26_2008.zip
ROC lib
compile library
To compile the ROC library I executed the following command within the subdirectory containing the v1495.c file
ccppc -fno-builtin -fno-for-scope -fstrength-reduce -mlongcall -mcpu=604 -DCPU=PPC604 -DVXWORKS -D_GNU_TOOL -DVXWORKSPPC -I/usr/local/coda/2.5/common/include/ -I../h -c -o v1495Lib.o -i v1495.c
load library onto the ROC
I then copies the library v1495Lib.o into my ROC library subdirectory which is where the ROC is pooing at boot up
/home/daq/CODA/ROClibs/libs
I loaded the library by hand by typing the following at the ROC console
-> ld < v1495Lib.o value = 268430512 = 0xfffecb0
Setting address
The address pins on this module are not labeled so I adopted the convention of numbering them from left to right as I look from the front pannel.
| Address | |
| Pin | Setting |
| SW 3 | F |
| SW 4 | A |
| SW 7 | 5 |
| SW 8 | 1 |
Go back VME_modules Go back