Difference between revisions of "GEM Cosmic V792 Measurements"

From New IAC Wiki
Jump to navigation Jump to search
Line 9: Line 9:
  
 
=12-10-08=
 
=12-10-08=
 +
 +
The signal below represents a measurement of the Trig out signal from a 10 cm x 10 cm ionization chamber with 3 GEM preamplifiers.  The chamber gas a 90/10 % mixture of Arcon and CO2.  The Drift HV was set to 3500 Volts and the GEM preamplifier HV distribution network was set to 3200 Volts.
 +
  
 
[[Image:TrigOutSignal_R607.gif]][[Media:TrigOutSignal_R607.eps]]
 
[[Image:TrigOutSignal_R607.gif]][[Media:TrigOutSignal_R607.eps]]

Revision as of 17:06, 10 December 2008

11-07-08

The pulse coming from the strips is delayed and amplified using the Timing Filter Amplifier Model_474(X6). The amplified pulse is connected to the V792 QDC.
Run 550

Start Time: Nov 6 19:58:03; End Time: Nov 7 09:45:57

ADC measurement GEMDetector HV3800V ADC1 11-07-08.gifADC measurement GEMDetector HV3800V ADC1 11-07-08 Landau fit.gif

12-10-08

The signal below represents a measurement of the Trig out signal from a 10 cm x 10 cm ionization chamber with 3 GEM preamplifiers. The chamber gas a 90/10 % mixture of Arcon and CO2. The Drift HV was set to 3500 Volts and the GEM preamplifier HV distribution network was set to 3200 Volts.


TrigOutSignal R607.gifMedia:TrigOutSignal_R607.eps


Go Back