Difference between revisions of "Minicom"
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
1. open xterm window. | 1. open xterm window. | ||
| − | 2. to get into the main root system type: su | + | 2. to get into the main root system type: |
| + | su | ||
3. enter password | 3. enter password | ||
| − | 4. type minicom | + | 4. open application type: |
| + | minicom | ||
| − | 5. To set communition speed: ctrl-a, z | + | 5. To set communition speed: |
| + | ctrl-a, z | ||
| + | p | ||
| + | e | ||
| − | + | 8. to initialize the scaler and allow operator to talk to the library which shows the counts: | |
| + | v260Init 0xda0000 | ||
| + | |||
| − | + | 9. to displays count on all channels in library: | |
| + | v260Status (0,1) | ||
| + | |||
| − | + | 10. to clear all channels: | |
| − | + | v260Clear | |
| + | |||
| − | + | To Exit: | |
| − | + | ctrl-a, z | |
| + | q | ||
| − | + | If scaler shows Disabled, Enable by typing: | |
| − | + | v260Enable(0) | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | If scaler shows Disabled, Enable by typing: v260Enable(0) | ||
Latest revision as of 21:26, 9 November 2007
Commands for Minicom:
1. open xterm window.
2. to get into the main root system type:
su
3. enter password
4. open application type:
minicom
5. To set communition speed:
ctrl-a, z p e
8. to initialize the scaler and allow operator to talk to the library which shows the counts:
v260Init 0xda0000
9. to displays count on all channels in library:
v260Status (0,1)
10. to clear all channels:
v260Clear
To Exit:
ctrl-a, z q
If scaler shows Disabled, Enable by typing:
v260Enable(0)