Difference between revisions of "Minicom"
Jump to navigation
Jump to search
| Line 16: | Line 16: | ||
e | e | ||
| − | 8. | + | 8. to initialize the scaler and allow operator to talk to the library which shows the counts: |
| − | + | v260Init 0xda0000 | |
| + | |||
| − | 9. v260Status (0,1) | + | 9. to displays count on all channels in library: |
| − | + | v260Status (0,1) | |
| + | |||
| − | 10. v260Clear | + | 10. to clear all channels: |
| − | + | v260Clear | |
| + | |||
| − | To Exit: ctrl-a, z | + | To Exit: |
| − | + | ctrl-a, z | |
| + | q | ||
If scaler shows Disabled, Enable by typing: v260Enable(0) | If scaler shows Disabled, Enable by typing: v260Enable(0) | ||
Revision as of 21:26, 9 November 2007
Commands for Minicom:
1. open xterm window.
2. to get into the main root system type:
su
3. enter password
4. open application type:
minicom
5. To set communition speed:
ctrl-a, z p e
8. to initialize the scaler and allow operator to talk to the library which shows the counts:
v260Init 0xda0000
9. to displays count on all channels in library:
v260Status (0,1)
10. to clear all channels:
v260Clear
To Exit:
ctrl-a, z q
If scaler shows Disabled, Enable by typing: v260Enable(0)