CH He3 Attenuation Measurements: 3 Different Cf252 Sources

Attenuation Experiment using New Modules in Electronics Chain and Inside Borated Poly Box

Electronics Chain (Poly Box)

Include schematic of electronics chain

Components

Each component of electronics chain with make/model, function, and brief description of why it's present

Ortec 142PC Pre-amp

Pre-amp for the He3 tube

CAEN Quad Linear Fan In - Fan Out Model N25 Tag #15687

• The fan in/out is used to duplicate the pulse to run the spec amp and watch the signal on the scope for any anomalies.

• The fan in/out is also used to invert the signal from the spec amp to send a negative pulse to the discriminator to trigger the scalar.

Ortec Spec Amp Model 672

• 10x Course Gain

• 1x Fine Gain

• 0.5us Shaping Time

• Uni Shaping: Gaussian

• Input: Norm (+)

• Output: Unipolar

• Manual Pole Zero adjustment

LeCroy Discriminator Model 821 Serial #B16303

• Variable threshold

• Pulse width as measured on scope: ~43ns

Plateau Measurements

1250V Plateau Measurements
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on poly blocks at +1250V	30	Yes		100
2	Detector on poly blocks at +1250V	40	Yes		100
3	Detector on poly blocks at +1250V	50	Yes		100
4	Detector on poly blocks at +1250V	60	Yes		100
5	Detector on poly blocks at +1250V	70	Yes		100
6	Detector on poly blocks at +1250V	80	Yes		100
7	Detector on poly blocks at +1250V	90	Yes		100
8	Detector on poly blocks at +1250V	100	Yes		100

Background Measurements

1250V Background Measurements
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on 3D printed stands at +1250V	255	No		100
2	Detector on 3D printed stands at +1250V	255	No		100
3	Detector on 3D printed stands at +1250V	255	No		100
4	Detector on 3D printed stands at +1250V	255	No		100
5	Detector on 3D printed stands at +1250V	255	No		100

Poly Box Attenuation Measurements

Open Source

1250V source in
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on poly at +1250V	80	Yes	34456	10
2	Detector on poly at +1250V	80	Yes	34920	10
3	Detector on poly at +1250V	80	Yes	34422	10
4	Detector on poly at +1250V	80	Yes	34007	10
5	Detector on poly at +1250V	80	Yes	34420	10

2" Green poly (one brick) in Box

1250V source in
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on poly at +1250V	80	Yes	7538	10
2	Detector on poly at +1250V	80	Yes	7515	10
3	Detector on poly at +1250V	80	Yes	7613	10
4	Detector on poly at +1250V	80	Yes	7566	10
5	Detector on poly at +1250V	80	Yes	7510	10

4" Green poly (two bricks) in Box

1250V source in
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on poly at +1250V	80	Yes		10
2	Detector on poly at +1250V	80	Yes		10
3	Detector on poly at +1250V	80	Yes		10
4	Detector on poly at +1250V	80	Yes		10
5	Detector on poly at +1250V	80	Yes		10

6" Green poly (three bricks) in Box

1250V source in
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on poly at +1250V	80	Yes		10
2	Detector on poly at +1250V	80	Yes		10
3	Detector on poly at +1250V	80	Yes		10
4	Detector on poly at +1250V	80	Yes		10
5	Detector on poly at +1250V	80	Yes		10

8" Green poly (four bricks) in Box

1250V source in
Run Number	Configuration	Discriminator Threshold (mV)	Cf-252 Source	Counts	Run Time (Sec)	Count Rate (Hz)	Uncertainty
1	Detector on poly at +1250V	80	Yes		10
2	Detector on poly at +1250V	80	Yes		10
3	Detector on poly at +1250V	80	Yes		10
4	Detector on poly at +1250V	80	Yes		10
5	Detector on poly at +1250V	80	Yes		10

---

Previous Page

CaGaS Phase II