Difference between revisions of "DAQ2 Upgrade Summer 2021"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 42: | Line 42: | ||
=7/28/21= | =7/28/21= | ||
| − | * MAC address swapped by CoSE IT to that of old daq | + | * MAC address and name swapped by CoSE IT to that of old daq |
| − | * | + | * ROOT rebuilt with latest stable version, 6.20, after cmake was updated |
| + | :* Installed all dependencies following instructions for centos 7 on cern website | ||
| + | ::* I believe these instructions has updated CMake to version >=3.9 as the default | ||
| + | |||
| + | * Able to run with ADC setup down in clean room from command center through a series of switches | ||
=Notes= | =Notes= | ||
Latest revision as of 17:44, 29 July 2021
7/26/21
- Working to install centos 7 onto the new DAQ computer
- The secondary HDD cannot be found through bios or centos 7
- Success: managed to mount secondary drive in "Bay 2 Sata"
- Next step is to shut down DAQ and insert drive with centos 7 on it and attempt to setup Bay 2 Sata as the boot
- Timezone set to Denver
- Installing centos 7 on new DAQ with base environment: Server with GUI
- No add-ons selected at this time
- Automatic partitioning is enabled
- KDUMP: Kdump is enabled
- Network and Host Name: not connected
- Security policy: No content found
- Setup daq user on new machine
- Centos install: Successful
- Was able to boot from Bay 2 Sata into centos 7
- Successful login into daq user
- There does not seem to be x11 or xterm present on system
- Internet was turned off in OS
- To enable: Applications > System tools > Settings > Network > Wired [off] -> Wired [on]
- Wiki access successful
- Cannot gain access to first drive to pull CODA files
- Located at: /run/media/daq/Data\ Storage
- Another possible access point may be at: /run/media/daq/_CentOS-6.2-i386/home/
- This shows directories coseadmin, daq, & faculty, all of which are not accessible
- I was able to directly log into the old daq machine and made a copy of the daq directory on the new machine. This brings the new machine up to date as of today, 7/26/21.
- Copy was completed successfully. Also moved root/dat files into a directory called root_files to clean up main directory
7/27/21
- Tony found a way to install all the necessary libraries now rcgui runs
- Default shell changed from bash to tcsh
7/28/21
- MAC address and name swapped by CoSE IT to that of old daq
- ROOT rebuilt with latest stable version, 6.20, after cmake was updated
- Installed all dependencies following instructions for centos 7 on cern website
- I believe these instructions has updated CMake to version >=3.9 as the default
- Able to run with ADC setup down in clean room from command center through a series of switches
Notes
- lsblk lists drives and partitions within those drives