Latest revision as of 16:38, 19 July 2021

3D Models

For all models:

Red - Lead brick

White - Regular poly

Green - Borated Poly

7/6/21

Render of top down view of preliminary experimental setup

This design is preliminary and subject to change. No BorAl shielding has been included.

7/12/21

7/14/21

Poly Bricks for Setup

Poly Base

4X (4" x 2" x 6")

2X (4" x 2" x 7")

Poly Outside Wall

1X (4" x 2" x 7")

1X (4" x 2" x 6")

2X (4" x 2" x 8")

Poly Inside Wall

1X (4" x 2" x 3")

1X (4" x 2" x 8")

2X (4" x 2" x 6")

Poly Top

2X (4" x 2" x 7")

3X (4" x 2" x 6")

2X (2" x 2" x 6")

Lead

50 lead bricks

(49) 4" x 1" x 8"

(1) 4" x 2" x 8"

BorAl

Needs to be calculated based off of new setup

First Built Design

Feasibility setup exterior
Looking down the detector tunnel towards the converter	Overview of the setup with detector tunnel extending to the right and the source tunnel extending towards the back of the image
The backside of the source tunnel with regular poly exposed	Top view of the source tunnel with poly present as a stability measure for lead bricks stacked on end

Feasibility setup interior
Top down view of rendering of experimental setup	Interior walls removed to show poly and lead structures inside. Detector mounting hardware included to show rough position of detector in experimental setup

PAS_Experimental_Setup

@@ Line 1: / Line 1: @@
-=3D Models=
+='''3D Models'''=
-==7/6/21==
+For all models:
-This design is preliminary and subject to change. No BorAl shielding has been included.
+* Red - Lead brick
+* White - Regular poly
+* Green - Borated Poly
+=='''7/6/21'''==
-=Poly=
+[[File:PAS_CH_Pb_tunnel_v13.png|300px|thumb|none|Render of top down view of preliminary experimental setup]]
-==Sizes needed for thermalizing box==
-* 2" x 6.75" x 4"
+This design is preliminary and subject to change. No BorAl shielding has been included.
-* 2" x 8" x 4"
+=='''7/12/21'''==
-* 2" x 4" x 4"
+[[File:CH PAS Pb tunnel v21 Gd Converter.png|300px]]
-* 1.75" x 4" x 8"
+[[File:CH PAS Pb Tunnel v21.png|300px]]
-* 12" x 2" x 7"
+=='''7/14/21'''==
-** These are the base and roof plates
-These are now all wrong and will need to be redesigned
+'''Poly Bricks for Setup'''
-=Lead=
+==='''Poly Base'''===
-* 4" x 1" x 8" (x12)
+* 4X (4" x 2" x 6")
-** The lead is layered beneath, around the outside, and on top of the thermalizing box
-The lead base is 4 bricks
+* 2X (4" x 2" x 7")
-The outside is covered by 5 bricks (on 1" x 4" side (upright))
+==='''Poly Outside Wall'''===
+* 1X (4" x 2" x 7")
+* 1X (4" x 2" x 6")
+* 2X (4" x 2" x 8")
+==='''Poly Inside Wall'''===
+* 1X (4" x 2" x 3")
+* 1X (4" x 2" x 8")
+* 2X (4" x 2" x 6")
+===Poly Top===
+* 2X (4" x 2" x 7")
+* 3X (4" x 2" x 6")
+* 2X (2" x 2" x 6")
+='''Lead'''=
+lead bricks
+* (49) 4" x 1" x 8"
+* (1) 4" x 2" x 8"
+='''BorAl'''=
+Needs to be calculated based off of new setup
+='''First Built Design'''=
+{| class="wikitable"
+|+ Feasibility setup exterior
+|-
+| [[File:PAS Feasibility 1.jpg|300px|thumb|center|Looking down the detector tunnel towards the converter]] || [[File:PAS Feasibility 2.jpg|300px|thumb|center|Overview of the setup with detector tunnel extending to the right and the source tunnel extending towards the back of the image]]
+|-
+| [[File:PAS Feasibility 3.jpg|300px|thumb|center|The backside of the source tunnel with regular poly exposed]] || [[File:PAS Feasibility 4.jpg|300px|thumb|center|Top view of the source tunnel with poly present as a stability measure for lead bricks stacked on end]]
+|}
+{| class="wikitable"
+|+ Feasibility setup interior
+|-
+| [[File:Pb_tunnel_As_Built_7-19-2021.png|300px|thumb|center|Top down view of rendering of experimental setup]] || [[File:Pb_tunnel_As_Built_7-19-2021_2.png|300px|thumb|center|Interior walls removed to show poly and lead structures inside. Detector mounting hardware included to show rough position of detector in experimental setup]]
+|}
-The top is covered by 3 bricks
-=BorAl=

Difference between revisions of "PAS Thermalizing Box Design"