Latest revision as of 21:54, 7 November 2018

SIS 3302 ADC digitizer, 100 MHz 12 bit

Manual

DIP settings

Address
Jumper	location
JP120A	top
JP120B	top
JP120C	top
JP120D	top
JP102	top

JP101 settings, left pin is toward front face of module

Address
pins	location
left	top
right	top

Jumper JP80 settings

Address
Pin	Setting
1	ON
2	OFF
3	OFF
4	OFF
5	ON
6	OFF
7	OFF
8	ON

JTAG jumpers (JP102) are closed on bottom for VME configuration

Address switches

SW1=0 SW2=8 A32 address = 0x08000000

SW1=5 SW2=0 A32 address = 0x50000000

ROC Lib

ROC source directory

Original files on DAQ1 are located in

/home/daq/CODA/ROClibs/sis3300

A copy was put in

/home/daq/CODA/ROClibs/SIS3302

Functions

sisInit

s3320Init (0x50000000, 0, 0)

error message

->  s3320Init(0x50000000,0,0)
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x50000000,&laddr) 
value = -1 = 0xffffffff

tried with bits swapped

-> s3320Init(0x05000000,0,0)
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x5000000,&laddr) 
value = -1 = 0xffffffff

Running

Program direcotry on rocdaq2

in subdirectory on rocdaq2

/home/daq/CODA/linuxvme/sis3302/test

Compiling s3302Libtest on rocdaq2

the command below compiled the program s3302LibTest

[daq@rocdaq2 test]$ make -f Makefile s3302LibTest cc -Wall -O2 -I. -I.. -I/home/daq/CODA/3.08/linuxvme/include -L. -L.. -L/home/daq/CODA/3.08/linuxvme/lib -DJLAB -g -o s3302LibTest s3302LibTest.c -lrt -ljvme -lsis3302

error message when outof memory when external trigger set

I ran ./s3302IntTest

gave it an external trigger and it filled the module memory giving the error

./s3302LibTest

JLAB s3302 Lib Tests
----------------------------
s3302SetDebugMask: Debug Mask set to 0x2
s3302SetDebugMask: Debug Mask set to 0x0

         ---------- Checking SIS3302 address space ---------- 

         ----------            ALL GOOD            ---------- 
Opening CRCSR Window 
jlabgefOpenCRCSR: ERROR
         gefVmeCreateMasterWindow returned: Out Of Memory (2)

VME_modules

Difference between revisions of "Struck SIS3302 ADC"