Difference between revisions of "Target Prep February 2017"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
|| Selenium Target 1 || Mass (g) | || Selenium Target 1 || Mass (g) | ||
|- | |- | ||
| − | ||Front Ni Foil || 0. | + | ||Front Ni Foil || 0.27 |
|- | |- | ||
| − | ||Rear Ni Foil || 0. | + | ||Rear Ni Foil || 0.25 |
|- | |- | ||
| − | || Se Mass || 0. | + | || Se Mass || 0.46 |
|- | |- | ||
| − | || Mass of Kapton || | + | || Mass of Kapton || 0.54 |
|- | |- | ||
| − | || Total Mass || | + | || Total Mass || 1.52 |
|- | |- | ||
|}<br> | |}<br> | ||
| Line 22: | Line 22: | ||
|| Selenium Target 2 || Mass (g) | || Selenium Target 2 || Mass (g) | ||
|- | |- | ||
| − | ||Front Ni Foil || 0. | + | ||Front Ni Foil || 0.23 |
|- | |- | ||
| − | ||Rear Ni Foil || 0. | + | ||Rear Ni Foil || 0.26 |
|- | |- | ||
| − | || Se Mass || 0. | + | || Se Mass || 0.49 |
|- | |- | ||
| − | || Mass of Kapton || | + | || Mass of Kapton || 0.65 |
|- | |- | ||
| − | || Total Mass || | + | || Total Mass || 1.62 |
|- | |- | ||
|}<br> | |}<br> | ||
Revision as of 19:34, 2 February 2017
There will be 4 targets that will be placed in the beam. Each sample of the selenium pellets had to be under 0.5g to meet waste restrictions. The 4 samples are as follows: one empty aluminum cylinder, one aluminum cylinder with only soil, one aluminum cylinder with a 50% ratio of soil to selenium, and one aluminum cylinder with a 10% ratio of soil to selenium. The selenium targets were prepared by measuring the mass of the sample, then putting a front nickel foil and a back nickel foil around the selenium pellets and wrapping the whole target in Kapton tape. The mass of an empty cylinder is 32.65g
| Selenium Target 1 | Mass (g) |
| Front Ni Foil | 0.27 |
| Rear Ni Foil | 0.25 |
| Se Mass | 0.46 |
| Mass of Kapton | 0.54 |
| Total Mass | 1.52 |
| Selenium Target 2 | Mass (g) |
| Front Ni Foil | 0.23 |
| Rear Ni Foil | 0.26 |
| Se Mass | 0.49 |
| Mass of Kapton | 0.65 |
| Total Mass | 1.62 |