Difference between revisions of "JB DAQ"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
R1DC->Draw("(evt.TDC1190[2][1]-evt.TDC1190[1][1])") | R1DC->Draw("(evt.TDC1190[2][1]-evt.TDC1190[1][1])") | ||
PMT difference: | PMT difference: | ||
| − | R1DC->Draw("(evt.TDC1190[1][2]-evt.TDC1190[1][3])/10>>h(n,min,max)",(Long64_t)6394][2]!=0&&evt.TDC1190[1][3]!=0") | + | R1DC->Draw("(evt.TDC1190[1][2]-evt.TDC1190[1][3])/10>>h(n,min,max)",(Long64_t)6394][2]!=0&&evt.TDC1190[1][3]!=0") |
A linear fit was done by using a set delay of 500,600,700, and 800 ns. | A linear fit was done by using a set delay of 500,600,700, and 800 ns. | ||
[[File:DAQCalibrtion.png|800 px|thumb|center]] | [[File:DAQCalibrtion.png|800 px|thumb|center]] | ||
Revision as of 20:02, 7 March 2016
Back JB Analysis
TDC Calibration
Source CODA and ROOT
source ~/CODA/2.6.2/setup source /home/daq/src/root/root-5.34.00/bin/thisroot.csh
Run the bash script titled 'jeff', which takes the run number as an argument. This script will automatically convert the .dat file to a .root file and then open it in root. The script: File:Jeff.txt.
bash jeff 4716
The first index of evt.TDC1190 is the hit #. The second index increases consecutively with TDC channel number, except the index starts from 1, while the TDC channels start at 0. Common ROOT plot commands for copy-past: First hit minus second hit:
R1DC->Draw("(evt.TDC1190[2][1]-evt.TDC1190[1][1])")
PMT difference:
R1DC->Draw("(evt.TDC1190[1][2]-evt.TDC1190[1][3])/10>>h(n,min,max)",(Long64_t)6394][2]!=0&&evt.TDC1190[1][3]!=0")
A linear fit was done by using a set delay of 500,600,700, and 800 ns.
