View source for NI488.2

==Add GPIB-ENET/100 Wizard==


''Device numbers can be changed later using Measurement & Automation Explorer''

Standard numbers:


==Interactive control==
Set up the GPIB:
 gpib1: ibdev
    enter board index: 1
    enter primary address: 16
    enter secondary address: 0
    enter timeout: 10
    enter 'EOI on last byte' flag: 1
    enter end-of-string mode/byte: 0
Enable remote control of MC2000:
 ud0: ibwrt "E"
 [0100]   ( cmpl )
 count:  1
Query the buffer status:
 ud0: ibwrt "B"
 [0100]   ( cmpl )
 count:  1
Read the buffer status:
 ud0: ibrd 60
 [2100]   ( end cmpl )
 count:  3
 2a  52  0d                              * R .