View source for R1S5 SL1 HVB1 BurnIn

{| border="1"  |cellpadding="20" cellspacing="0 
|-
|Date || Time (24h) || Guard (V) || Sense (V)  || Field (V) || Sense (<math>\mu</math>A) || Field (<math>\mu</math>A) || comments
|-
| 06/25/13 || 15:05 ||  30 || 40 ||  -50 || 0.0 || 0.025 || Guard current is at 15.9 microamps. Have never observed it above 0.000 before. Turned off voltage to check cabling setup.
|-
| 06/25/13 || 15:19 ||  30 || 40 ||  -50 || 0.0 || 0.025 || Found a grounding strap attached to the HVB side of Board 1. Removed and torqued down the screw it was on. Guard current is normal now. Field/sense current stabilized within 30 seconds to this reading.
|-
| 06/25/13 || 15:22 ||  536 || 1500 ||  -750 || 4.6 || 4.7 || Current appears stable +/- 0.2 microamps for at least 30 seconds after finishing voltage rise.
|-
| 06/25/13 || 15:29 ||  536 || 1500 ||  -750 || 4.1 || 4.2 ||
|-
| 06/26/13 || 07:14 ||  536 || 1500 ||  -750 || 1.18 || 1.2 ||
|-
| 06/26/13 || 17:29 ||  536 || 1500 ||  -750 || 1.2 || 1.1 || Shut off HV to switch back to the Kraken on SL2 and check current levels w/ grounding strap now removed.
|-
| 07/19/13 || 22:40 ||  536 ||  ||  - || ||  || returned to burning in SL1 using the kraken after finishing SL2
|-
| 07/19/13 || 14:51 ||  536 || 680 ||  -680 ||4.0 || 4.2  || 
|-
| 07/22/13 || 08:20 ||  536 || 770 ||  -750 ||8.3 || 9.5  || guard current 1 uA
|-
| 07/22/13 || 10:47 ||  536 || 990 ||  -750 ||7.7 || 8.7  || guard current 0.89 uA
|-
| 07/22/13 || 11:08 ||  536 || 1040 ||  -750 || 6.6 || 6.7  || 
|-
| 07/24/13 || 07:52 ||  536 || 1130 ||  -750 || 3.4 || 3.3  || after replacing a tank.
|-
| 07/24/13 || 07:52 ||  536 || 1150 ||  -750 || 4.4 || 4.3  || 

|-
| 07/24/13 || 09:10 ||  536 || 1150 ||  -750 || 7.1 || 7.0  || 
|-
| 07/24/13 || 09:51 ||  536 || 1150 ||  -750 || 4.1 || 4.0  || 
|-
| 07/24/13 || 11:09 ||  536 || 1170 ||  -750 || 4.9 || 4.8  || 
|-
| 07/24/13 || 11:58 ||  536 || 1180 ||  -750 || 5.4 || 5.3  || 





|}